[CentOS] Restarting mouse services

Fri Sep 8 00:53:54 UTC 2006
Robert Moskowitz <rgm at htt-consult.com>

William L. Maltby wrote:
> On Thu, 2006-09-07 at 18:56 -0400, Robert Moskowitz wrote:
>   
>> William L. Maltby wrote:
>>     
>>> On Thu, 2006-09-07 at 17:37 -0400, Robert Moskowitz wrote:
>>>   
>>>       
>>>> William L. Maltby wrote:
>>>>     
>>>>         
>>>>> On Thu, 2006-09-07 at 16:55 -0400, Robert Moskowitz wrote:
>>>>>   
>>>>>       
>>>>>           
>>>>>> William L. Maltby wrote:
>>>>>>     
>>>>>>         
>>>>>>             
>>>>>>> On Thu, 2006-09-07 at 16:21 -0400, Robert Moskowitz wrote:
>>>>>>> <snip>
>>>>>>>           
>>>>>>>               
>>>   
>>>       
>>>>>> Maybe it is usb services that needs a kick in its hindend?
>>>>>> <snip>
>>>>>>             
>
>   
>>> Wouldn't be there. These are device drivers. *If* they're loadable
>>> modules (I think they are), they can be inserted by the initrd process
>>> or may be mandated in the /etc/modprobe.conf file.
>>>
>>> If you do "lsmod" you'll see them *if* they are modules. 
>>>       
>> Yep, there they are.
>>     
>>> There's also a
>>> command that I like "modinfo". Gives basic info. There's some params,
>>> IIRC. "Man modinfo" 'cause I'll be darned if I remember them! :-(
>>>   
>>>       
>> But nothing to restart.  I can remove and install the modules with 
>> modprobe, but not restart.
>>     
>
> *If* something, such as a mouse driver depended on them, normally a
> modprobe.conf (is USB special? Does it need definition in modprobe.conf?
> Yes, see below) might exist that showed that relationship. So, after you
> removed the usb drivers, if you did a restart on the mouse or kb or
> whatever, it would cause the modules to be reloaded via modprobe.conf
> entries. I don't use mouse/keyboard there, but mine has this.
>
> alias usb-controller ehci-hcd
> alias usb-controller1 uhci-hcd
>
> So if i did a mount, e.g. of my usb drive, that should cause the usb
> modules to be automatically loaded.
>
> So, restart your mouse on the test machine and if your fortunate, the
> modprobe will occur, based on the node's "memory" that your mouse is
> usb, to load those modules.
>   
Well I did a

modprobe -rv ehci-hcd
modprobe -rv ohci-hcd

The USB keyboard stopped working after I removed ohci-hcd.

I unplugged and replugged the USB M/K adapter and nothing happene.  No 
mouse, no keyboard (of course notebook mouse/pointer continued to 
work).  Then I did a:

modprobe -v ohci-hcd

And the usb keyboard started up,  but not the mouse.

gpm restart did nothing.

Well, it is time to move my notebook.  Next local only has a usb mouse, 
no kvm, no external keyboard...
>   
>> I suppose I can do the remove and install to act as a remove?  And then 
>> which one?  Are they interdepent or what?
>>     
>
> I'm not that familiar. IIRC, if one depended on the other, that would be
> in modprobe. But that could be elsewhere now? It's been a  long time.
> Maybe they are independent. Like maybe one's a block driver and the
> other a character or something? I have never even read up on them.
>
>   
>>>   
>>>       
>>>> <snip>
>>>>     
>>>>         
>>> Test on one of your non-critical machines? rmmod <the name of a module>
>>> and it will either remove it or tell you something is using it, IIRC.
>>> That might give you enough boost on the old learning curve to address
>>> the current problem without resorting to Windows SOP.
>>> <snip sig stuff>
>>>       
>
> HTH
> --
> Bill
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
>