On Thu, 2006-08-31 at 10:35 -0500, Johnny Hughes wrote: > On Thu, 2006-08-31 at 11:00 -0400, Jerry Geis wrote: > > When using 4.4 to install on gigabyte GA-M51GM-S2 motherboard > > basically an Nforce 410/430 chipset then network is not initially detect to > > perform a network install. It let me attempt to manually select a driver > > but I > > do not see the driver in the list. > > > > After installing the network works and the forcedeth driver is loaded. > > > > Is there a way to get this driver detected or manually loaded? > > > > THanks, > > jerry > > _______________________________________________ > > According to the upstream release notes ... this is supposed to be fixed > on 4.4 > > From rom the kernel changelog and release notes: > > -amd74xx: add pci ids for Nvidia MCP51 > -Update 4 adds Nvidia nForce 430/MCP51 IDE support I think the issue is with the Realtek RTL8211 Gigabit Ethernet controller that the board uses and not the nVidia chipset. A quick solution might be to find any 10/100 NIC and see if that works instead. I looked and did not find what module to load for the RTL-8211 chip. Regards, Paul