[CentOS] Raid 1 newbie question

[Roberto Pereyra]

2007/4/26, Akemi Yagi <amyagi at gmail.com>:
> On 4/25/07, alex at avantel.ca <alex at avantel.ca> wrote:
> > On Wed, April 25, 2007 11:54 am, Roberto Pereyra wrote:
>
> > hdc3 appears to be the problem.  Try using mdadm (man mdadm) query mode to
> > find out more info about md1 and /dev/hdc3.  Are you sure /dev/hdc3 is set
> > to be linux raid autodetect (use fdisk to find out).  You can also try
> > adding hdc3 to the array with mdadm - see the man page for details.
>
> I recently had a similar problem.  One disk was reported to have
> failed.  I ran mdadm to add it back.  The reconstruction took a couple
> of hours (500GB) but it seems to be working now.  So, as the above
> advice suggests, read man page for mdadm and try to recover the lost
> partition.
>
> Akemi
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>



Hi !

Can I force the reconstruction without risk with this command ?

 mdadm --assemble --force

roberto




-- 
Ing. Roberto Pereyra
ContenidosOnline
http://www.contenidosonline.com.ar