On Wed, April 25, 2007 11:54 am, Roberto Pereyra wrote: > Hi > > I have a Raid 1 centos 4.4 setup and now have this /proc/mdstat output: > > [root at server admin]# cat /proc/mdstat > Personalities : [raid1] > md2 : active raid1 hdc2[1] hda2[0] > 1052160 blocks [2/2] [UU] > > md1 : active raid1 hda3[0] > 77023552 blocks [2/1] [U_] > > md0 : active raid1 hdc1[1] hda1[0] > 104320 blocks [2/2] [UU] > > > What happens with md1 ? hdc3 appears to be the problem. Try using mdadm (man mdadm) query mode to find out more info about md1 and /dev/hdc3. Are you sure /dev/hdc3 is set to be linux raid autodetect (use fdisk to find out). You can also try adding hdc3 to the array with mdadm - see the man page for details. cheers; Alex ==== > > > My dmesg output is: > > [root at server admin]# dmesg | grep md1 > > Kernel command line: ro root=/dev/md1 rhgb quiet > md: created md1 > raid1: raid set md1 active with 1 out of 2 mirrors > md: md1 already running, cannot run hdc3 > md: md1 already running, cannot run hdc3 > EXT3-fs: md1: orphan cleanup on readonly fs > EXT3-fs: md1: 4 orphan inodes deleted > md: md1 already running, cannot run hdc3 > EXT3 FS on md1, internal journal > [root at server admin]# > > > Thanks for any help !!! > > roberto > > > -- > Ing. Roberto Pereyra > ContenidosOnline > http://www.contenidosonline.com.ar > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > > -- > This message has been scanned for viruses and > dangerous content by Avantel Systems, and is > believed to be clean. > -- This message has been scanned for viruses and dangerous content by Avantel Systems, and is believed to be clean.