2007/4/26, Akemi Yagi <amyagi at gmail.com>: > On 4/25/07, alex at avantel.ca <alex at avantel.ca> wrote: > > On Wed, April 25, 2007 11:54 am, Roberto Pereyra wrote: > > > hdc3 appears to be the problem. Try using mdadm (man mdadm) query mode to > > find out more info about md1 and /dev/hdc3. Are you sure /dev/hdc3 is set > > to be linux raid autodetect (use fdisk to find out). You can also try > > adding hdc3 to the array with mdadm - see the man page for details. > > I recently had a similar problem. One disk was reported to have > failed. I ran mdadm to add it back. The reconstruction took a couple > of hours (500GB) but it seems to be working now. So, as the above > advice suggests, read man page for mdadm and try to recover the lost > partition. > > Akemi > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > Hi ! Can I force the reconstruction without risk with this command ? mdadm --assemble --force roberto -- Ing. Roberto Pereyra ContenidosOnline http://www.contenidosonline.com.ar