>Scott Silva spake the following on 4/26/2007 12:25 PM: >>/ Scott Silva spake the following on 4/26/2007 12:04 PM: />>>/ Jerry Geis spake the following on 4/26/2007 11:53 AM: />>>>>/ i believe i had mentioned this already on this list: />>>>>/ have had same problems with my asus m2npv-vm board (onboard />>>>>/ forcedepth nic) the first days with the board under fedora 6 - would />>>>>/ say no big diff's to centos- />>>>>/ the fedora way goes: />>>>>/ 1. move or delete /etc/sysconfig/hwconf />>>>>/ 2. move or delete /etc/modprobe.conf />>>>>/ 3. run kudzu afterwards => this writes new hwconf, modprobe.conf />>>>>/ 4. bring your nic's down: ifdown ethx />>>>>/ 5. remove the driver via modprobe -rv <your-nic-driver> (forcedepth) />>>>>/ 5a. maybe to be sure: lsmod|grep -i <your-nic-driver> />>>>>/ 6. reload the driver via modprobe -sv ... />>>>>/ 7. fix your mac-addr-settings via system-config-network />>>>>/ 8. compare your mac's in hwconf _and_ via ifconfig />>>>>/ steps 4-6 are also performed via reboot (grrrrrrrrrr: m$ world tasks), />>>>>/ but your are able to exclude if this files were changed again after />>>>>/ step 3. (ls -l /etc/sysconfig/hwconf => date/time !) />>>>>/ a hint of another problem ! />>>>>/ if there are still diff's, then it's another problem i don't know a />>>>>/ solution for, yet, but i remember ethx order changes and therefore mac />>>>>/ mismatches at late fedora 5/early fedora 6 kernels. />>>>>/ try and report ! />>>>>/ okay ? />>>>>/ -- />>>>>/ ronald />>>>/ Ronald, />>>>/ />>>>/ Thanks for the above. However, sadly it did not work. />>>>/ Also I see no way in the system-config-network to set a MAC address. />>>>/ I was in the character mode here not X. />>>>/ />>>>/ This is SOOO bizzar. Again, when I started I had 2 Asus M2N-MX boards. />>>>/ One was giving the invalid MAC address and one seemed OK. />>>>/ Both had the forcedeth driver loaded for onboard network. />>>>/ />>>>/ I bought 2 gigabyte motherboards (DIFFERENT BIOS) and I have the same />>>>/ issue. One board is working and the other is giving the invalid MAC />>>>/ address. />>>>/ Both gigabytes have the forcedeth driver. />>>>/ />>>>/ I tried loading centos 4 but it does not even recognize the forcedeth />>>>/ device at all. />>>>/ even manually loading. />>>>/ />>>>/ I'm at a loss. I have a script file that runs and sets things up the way />>>>/ I want after boot up. Not pretty - but I guess it works. />>>>/ />>>>/ Jerry />>>/ This appears to be a bug in the forcedeth driver and the chipset. The driver />>>/ seems to pull the current MAC address from a register, and writes it back />>>/ differently. The systems with the trouble must allow this write to take place, />>>/ and it changes the MAC address for the next boot. />>>/ I think if you add a HWADDR: xx:xx:xx:xx:xx:xx command to the ifcfg script, />>>/ it might stick. You will have to find your real MAC address on your own, but />>>/ it might be on a sticker somewhere on the board, or in a service tag on the />>>/ equipment. />>>/ />>/ Ignore the HWADDR line. I am pretty sure that is the wrong command, but I />>/ can't find the right one anywhere. />>/ />>/ You could try the NVidia network driver, or manually compile the forcedeth />>/ 0.60 driver, which is reported to fix this. Maybe upstream will add this />>/ driver to their kernels so it can flow back to CentOS. />>/ />I found the command just as I hit send. >Try MACADDR=<MAC-address> in the if-cfg file. >Look at this page for more details. >http://www.redhat.com/docs/manuals/enterprise/RHEL-5-manual/Deployment_Guide-en-US/s1-networkscripts-interfaces.html Scott, THanks - I tried this just now and it did not work... The new kernel is working but iptables is not compiled in??? Jerry