Ming wrote: > I got the have install a SATA HardDisk on the machine recently. But > somethings the Disk cannot be accessed. And mesg tells that it is IO > error. Is it a hardware problem or system setting problem. > > Here is the message from dmesg. > > sd 0:0:0:0: SCSI error: return code = 0x00040000 > end_request: I/O error, dev sda, sector 27099199 > EXT3-fs error (device sda1): ext3_readdir: directory #1687553 > contains a hole at offset 0 > > > Thank you. > > Regards, > Ming > > On 8/29/07, *Ming* <cyberming at gmail.com <mailto:cyberming at gmail.com>> > wrote: > > I got the have install a SATA HardDisk on the machine recently. > But somethings the Disk cannot be accessed. And mesg tells that it > is IO error. Is it a hardware problem or system setting problem. > > Here is the message from dmesg. > > sd 0:0:0:0: SCSI error: return code = 0x00040000 > end_request: I/O error, dev sda, sector 27099199 > EXT3-fs error (device sda1): ext3_readdir: directory #1687553 > contains a hole at offset 0 > > > Thank you. > > Regards, > Ming > > Hi - I had some funny problems with an SATA drive. I found the problem to be that the power connector was a little loose. I would check that first. Denis Becker Information Technology - Engineering MN State Univ., Mankato Mankato, MN ph: 507-389-5617 fx: 507-389-5002