Johnny Hughes wrote: > Tony Schreiner wrote: >> On CentOS 4.5 (x86_64); happening on several different machines >> >> >> with libstdc++ and libstdc++-devel v. 3.4.6-8 >> >> only one of the i386 or x86_64 versions of libstc++-devel is installed >> >> if I >> yum install libstdc++-devel >> >> it will install the x86_64 version and remove the i386 version, but not >> warn me. Similarly if the i386 version is installed it will install the >> x86_64 and remove the i386, without warning. >> >> But if i remove libstc++-devel (and necessarily gcc-c++), then reinstall >> with >> >> yum install gcc-g++ libstdc++-devel >> >> both versions of libstdc++-devel will be installed. > > There is really no easy answer to this question, except that you need to > specify .i386 and .x86_64 in your yum commands. > > I almost always do not use any i386 packages on any x86_64 machines > because of this. I always either put this in yum.conf: > > exclude=*.i386 > > or this (on machines I build with): > > exclude=exclude=[ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefhijklmnopqrstuvwxyz]*.i?86 > g[abcdefghijkmnopqrstuvwxyz]*.i?86 glib2*.i?86 glib-*.i?86 glib.i?86 > > (That allows glibc and glibc-devel) > > If you want to use all the i386 programs available in the x86_64 tree, > it is going to require special actions to administer ... and it is not > easy (IMHO). I wish it were easier ... but I am afraid it is not. > > Thanks, > Johnny Hughes Thanks Johnny, My point was mainly that it seems inconsistent that I could install both of them if neither one is present, but cannot install the other one if one is present. This appears to be different than on Fedora 7 anyway. I'm not that sure that I need the i386 version on these machines, I thought I did for the occasional -m32 compilation. Tony Schreiner Biology Department Boston College