On Wed, 2007-08-15 at 19:38 -0700, Anoop Rajendra wrote: > Hi. I'm having trouble accessing a shared directory over NFSv4 on a > CentOS 4.5 machine. > > My export file reads > > /test 10.0.0.0/255.0.0.0(ro,async,insecure,nohide,no_subtree_check) > > I've also tried to include the fsid=0 argument in my /etc/exports > file. That gives me a whole different error fsid MUST be included on the main mount point like this: /export gss/krb5(fsid=0,sync,no_root_squash,insecure,no_subtree_check,anonuid=65534,anongid=65534) /export/home1 gss/krb5(rw,nohide,sync,insecure,no_subtree_check,anonuid=65534,anongid=65534) /export/home2 gss/krb5(rw,nohide,sync,insecure,no_subtree_check,anonuid=65534,anongid=65534) # # legacy mounts # /export/home1 192.168.159.1/24(rw,sync,no_root_squash,insecure,no_subtree_check) # /export/home2 192.168.159.1/24(rw,sync,no_root_squash,insecure,no_subtree_check) (sorry, evolution forces extra linebreaks, after the pathnames), so /eports is the base path, home1 and home2 the exported filesystems. I use kerberos so I do not have the hostnames there, but the gss/krb5 > > [root at pebble-anoop ~]# mount -v -t nfs4 pebble-anoop:/test/ /mnt/ > mount: pinging: prog 100003 vers 4 prot tcp port 2049 > mount: special device pebble-anoop:/test/ does not exist > Here is your real problem: nfs mount points are relative to the base export point, i.e. /export in my case. If you only have /test exported, you have to mount peobble-anop:/ not ../test! In my case I mount server:/home1 and server:/home2