CentOS List spake the following on 8/29/2007 12:04 PM: >> CentOS List spake the following on 8/29/2007 11:31 AM: >>> Hi ppl . >>> >>> I am getting a IBM x3200.. This machine can only support up to 4 x >>> 250GB SATA. I need to have a usable space of 500GB and mirror it to >>> other 500GB. >>> IBM proposed me to get 2 RAID cards. Do you guys think i can do raid >>> 0 on the first 2 x 250GB HDD and raid 0 on the second 2 x 250GB hdd, >>> both on hardware raid and then during the installation of centos 5, i >>> raid 1 on both the 2 sets of hardware raids? >>> >>> Thanks >> Buy a single raid card that can support raid 10 or raid 1+0. > > The card IBM recommended is only 0,1 and they will not warranty any > parts which are not from IBM. Then you could software raid the two raid sets, as they will show up looking like scsi devices. Is the card they recommend a true hardware raid card? Not a fakeraid like the ICH7 intel stuff. So IBM will not warranty the raid card. They have to warranty the rest of the system, and get a warranty on the raid card from the vendor. I have done it with HP several times because the crappy Adaptec raid cards they push are less than stellar performers, and their linux driver support seems way behind the windows drivers. Which x3200 were you looking at? I could get up to 3.0 TB with 4 750 GB drives on the one I was just looking at. And optional raid5. You could just raid1 with 2 500GB drives. -- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!!