[CentOS] LVM2: large volume problem?

Antonio da Silva Martins Junior

asmartins at uem.br
Thu Dec 6 13:24:59 UTC 2007


Hi all,

   I'm having problems to create/resize an lv up to 1T (well I can't reach 300G),
my system is a CentOS 5.1 x86_64 on a Dell 2950 with 6x500G SATA (RAID5 to aprox. 2.5T)


[root at Mugello ~]# fdisk -l

Disk /dev/sda: 2497.7 GB, 2497791918080 bytes
255 heads, 63 sectors/track, 303672 cylinders
Units = cilindros of 16065 * 512 = 8225280 bytes

Dispositivo Boot      Start         End      Blocks   Id  System
/dev/sda1   *           1          13      104391   83  Linux
/dev/sda2              14       36323   291657269+  8e  Linux LVM
[root at Mugello ~]# vgdisplay
  --- Volume group ---
  VG Name               sys
  System ID             
  Format                lvm2
  Metadata Areas        1
  Metadata Sequence No  26
  VG Access             read/write
  VG Status             resizable
  MAX LV                0
  Cur LV                4
  Open LV               4
  Max PV                0
  Cur PV                1
  Act PV                1
  VG Size               2,27 TB
  PE Size               32,00 MB
  Total PE              74436
  Alloc PE / Size       512 / 16,00 GB
  Free  PE / Size       73924 / 2,26 TB
  VG UUID               yuxYGR-dLVP-DuXz-i4oP-14ep-aYWQ-xBp6f1
[root at Mugello ~]# lvs
  LV   VG   Attr   LSize Origin Snap%  Move Log Copy% 
  root sys  -wi-ao 4,00G                              
  swap sys  -wi-ao 2,00G                              
  usr  sys  -wi-ao 5,00G                              
  var  sys  -wi-ao 5,00G                              



  When I try to create a 1T lv it gives me this error:

[root at Mugello ~]# lvcreate -L1T -nstor sys
  device-mapper: reload ioctl failed: Argumento inválido
  Failed to activate new LV.

  and on /var/log/messages I had this:

Dec  6 08:31:27 Mugello kernel: device-mapper: table: device 8:2 too small for target
Dec  6 08:31:27 Mugello kernel: device-mapper: table: 253:4: linear: dm-linear: Device lookup failed
Dec  6 08:31:27 Mugello kernel: device-mapper: ioctl: error adding target to table

   the lv is created:

[root at Mugello ~]# lvs
  LV   VG   Attr   LSize Origin Snap%  Move Log Copy% 
  root sys  -wi-ao 4,00G                              
  stor sys  -wi-d- 1,00T                              
  swap sys  -wi-ao 2,00G                              
  usr  sys  -wi-ao 5,00G                              
  var  sys  -wi-ao 5,00G                              

   but is unusable:

[root at Mugello ~]# mkfs -t ext3 /dev/sys/stor
mke2fs 1.39 (29-May-2006)
Could not stat /dev/sys/stor --- Arquivo ou diretório não encontrado

The device apparently does not exist; did you specify it correctly?
[root at Mugello ~]# ls -la /dev/mapper/
total 0
drwxr-xr-x  2 root root     160 Dez  6 09:02 .
drwxr-xr-x 12 root root    4220 Dez  6 07:43 ..
crw-------  1 root root  10, 63 Dez  6 07:43 control
brw-rw----  1 root disk 253,  0 Dez  6 07:43 sys-root
brw-rw----  1 root disk 253,  4 Dez  6 09:02 sys-stor
brw-rw----  1 root disk 253,  3 Dez  6 07:43 sys-swap
brw-rw----  1 root disk 253,  1 Dez  6 07:43 sys-usr
brw-rw----  1 root disk 253,  2 Dez  6 07:43 sys-var
[root at Mugello ~]# mkfs -t ext3 /dev/mapper/sys-stor
mke2fs 1.39 (29-May-2006)
mkfs.ext3: Device size reported to be zero.  Invalid partition specified, or
        partition table wasn't reread after running fdisk, due to
        a modified partition being busy and in use.  You may need to reboot
        to re-read your partition table.

  If I try with a small size (less than 300G) it works well:

[root at Mugello ~]# lvcreate -L100G -nstor sys
  Logical volume "stor" created
[root at Mugello ~]# lvs
  LV   VG   Attr   LSize   Origin Snap%  Move Log Copy% 
  root sys  -wi-ao   4,00G                              
  stor sys  -wi-a- 100,00G                              
  swap sys  -wi-ao   2,00G                              
  usr  sys  -wi-ao   5,00G                              
  var  sys  -wi-ao   5,00G                              

 What can I try to do to create an lv with 1T??

    Thanks in advance,

           Antonio.  

-- 
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+
| Antonio S. Martins Jr. - Support Analist | "Only The Shadow Knows     |
| Universidade Estadual de Maringá - Brasil|   what evil lurks in the   |
| NPD - Núcleo de Processamento de Dados   |       Heart of Men!"       |
| E-Mail: asmartins at uem.br / shadow at uem.br | !!! Linux User: 52392 !!!  |
+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+


-- 
Esta mensagem foi verificada pelo sistema de antivírus e
 acredita-se estar livre de perigo.




More information about the CentOS mailing list