Hi ALL,
Short description of my problem:
I am not able to make wireless network working on the IBM ThinkPad T43p.
System: T43p
OS: CentOS 4.4
kernel: 2.6.9-34.EL
firmware: ipw2200-firmware-3.0-3.nodist.rf.noarch.rpm
What did I do ?
- installed firmware from RPM package
- removed kernel driver (/sbin/rmmod ipw2200)
- installed kernel module (/sbin/modprobe ipw2200)
dmesg output:
=================
Dec 24 16:45:43 localhost kernel: ipw2200: Intel(R) PRO/Wireless 2200/2915
Network Driver, 1.0.0
Dec 24 16:45:43 localhost kernel: ipw2200: Copyright(c) 2003-2004 Intel
Corporation
Dec 24 16:45:43 localhost kernel: ACPI: PCI interrupt 0000:04:02.0[A] -> GSI
11 (level, low) -> IRQ 11
Dec 24 16:45:43 localhost kernel: ipw2200: Detected Intel PRO/Wireless
2200BG Network Connection
Dec 24 16:45:44 localhost hald[3408]: Timed out waiting for hotplug event
577. Rebasing to 578
Dec 24 16:45:44 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core
team
Dec 24 16:46:00 localhost hald[3408]: Timed out waiting for hotplug event
580. Rebasing to 581
Dec 24 16:46:02 localhost hald[3408]: Timed out waiting for hotplug event
583. Rebasing to 584
Dec 24 16:46:04 localhost hald[3408]: Timed out waiting for hotplug event
587. Rebasing to 588
Dec 24 16:46:06 localhost hald[3408]: Timed out waiting for hotplug event
590. Rebasing to 591
Dec 24 16:46:08 localhost hald[3408]: Timed out waiting for hotplug event
593. Rebasing to 594
- started 'system-config-network' tool
- checked eth1 (wireless) (aka enabled wireless)
- edited (via edit buton ) eth1 configuration
Mode: auto
Network name (SSID): linksys
Channel: 1
Transmit rate: auto
Key: 0x????? (26 hex numbers)
- clicked the Activate button
Result:
dmesg output:
Dec 24 19:25:06 localhost kernel: ip_tables: (C) 2000-2002 Netfilter core
team
Dec 24 19:25:07 localhost hald[3408]: Timed out waiting for hotplug event
626. Rebasing to 627
Dec 24 19:25:21 localhost hald[3408]: Timed out waiting for hotplug event
629. Rebasing to 630
Dec 24 19:25:23 localhost hald[3408]: Timed out waiting for hotplug event
632. Rebasing to 633
terminal output:
Error for wireless request "Set Bit Rate" (8B20) :
SET failed on device eth1 ; Operation not supported.
Determining IP information for eth1... failed; no link present. Check
cable?
Can some merciful soul give me a hint or/and solution or/and RTFM pointer
for my problem ?
Thanks in advance
Igor
--
Experience is what you get when you didn't get what you wanted.
Randy Pausch
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.centos.org/pipermail/centos/attachments/20071224/7ef216ba/attachment-0004.html>