Scott Ehrlich wrote: > What is the make/model of this system? I have yet to touch a system > (PC-based) that does not allow access to BIOS. DecTop http://www.dataevolution.com/dectop%20info%202.htm > > Scott > > On Thu, 27 Dec 2007, Robert Moskowitz wrote: > >> Scott Ehrlich wrote: >>> On Thu, 27 Dec 2007, Robert Moskowitz wrote: >>> >>>> I have a set of systems that I have to build that cannot be booted >>>> from CD. So I put the drive in another system, do the install, move >>>> the drive, and fix the video with system-config-display. >>>> >>>> But seems perhaps there is another (small) problem. The build >>>> system has a PS/2 keyboard interface (and mouse). The target system >>>> has NO PS/2 interfaces. Only USB is available. >>>> >>>> So at boot I get the message: >>>> >>>> atkbd.c: Failed to enable keyboard on isa0060/serio0 >>>> >>>> What do I do to remove this? >>>> >>> >>> There does exist a USB -> PS/2 adapter. See if you can procure one >>> (colleague, store, etc) >>> . Times like these they really come in handy. >> I have 1/2 dozen of them. And I get this message when I have one >> plugged into the unit and the adapter plugged into my old PS/2 based >> KVM. >>> You should also review the BIOS options for USB Emulation mode. If >>> it is off, you should turn it on. >> And this system does not give access to the BIOS! There is a lot I >> would like to do with the BIOS, like get it to boot automatically at >> power restore. >> >> There is no intention that in production, the units will have a >> keyboard or mouse. All management will be done via some remote >> console program (using VNC for right now). But I have to do the >> install on a PS/2 based system. Would like to cut out what is not >> needed.... >> >> >> _______________________________________________ >> CentOS mailing list >> CentOS at centos.org >> http://lists.centos.org/mailman/listinfo/centos >> > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos >