[CentOS] Centos 4 and Supermicro ICH7R

Thu Feb 15 10:27:50 UTC 2007
ricardo oliveira <ricardoliv at gmail.com>

Hi folks:

I've contacted Supermicro Europe Support, and they were awesome! They
sent me the drivers for RHEL U3/U4 ... So I'll test them today... Hope
it works!

Ricardo

On 2/15/07, Johnny Hughes <mailing-lists at hughesjr.com> wrote:
> On Wed, 2007-02-14 at 19:23 +0000, ricardo oliveira wrote:
> > Hi:
> >
> > I've tried to install centos 4.3 in a raid array, setuped on bios as
> > mode "Adaptec". The chip is  ICH7R but centos always sees 2 drives
> > instead of the array that I create.
> > I've contacted Supermicro support and they gave me this link
> > ftp://ftp.supermicro.com/driver/SATA/Adaptec_ICH7R/Linux/Redhat/ , but
> > the disk drivers I tried to use with centos 4.3 did not work, saying
> > that the disk did not containt appropriate drivers for the hardware.
> >
> > Have anyone here had similar problems? does centos 4.4 solves this issue?
> >
> > I really need to install centos as an array... and as hardware RAID
> > and not software RAID.
> >
>
> You have probably already seen all the other posts ... however I want to
> make sure everybody understands...
>
> The RAID that is built onto the motherboards on almost all these
> chipsets _IS_NOT_HARDWARE_RAID_ ... any more than a win Modem is a real
> modem.
>
> The RAID really is just software raid _WITH_A_PROPRIETARY_DRIVER_ .
>
> The proprietary nature of that driver makes it much less stable than
> linux software raid.
>
> So, as others have mentioned, buy a REAL hardware RAID card ... like
> vmware ... or use software RAID.
>
> Also, as others have mentioned, please search for "fake raid" or "fraid"
> on google for more information.
>
> Thanks,
> Johnny Hughes
>
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
>
>