[CentOS] Server Install Eth0 & Eth1 not working
Johnny Hughes
mailing-lists at hughesjr.com
Mon Jan 15 22:59:51 UTC 2007
On Mon, 2007-01-15 at 17:42 -0500, Nielsen, Steve wrote:
> On 2950s the eth devices are assigned their number in the wrong order:
>
> Gb1 becomes eth1 (should be eth0)
> Gb2 becomes eth0 (should be eth1)
>
> Dell posted software that provides a way for the Linux kernel to name
> the interfaces correctly.
>
> Here is a link to the white paper:
> http://linux.dell.com/files/whitepapers/nic-enum-whitepaper-v3.pdf
>
> Steve
>
> -----Original Message-----
> From: centos-bounces at centos.org [mailto:centos-bounces at centos.org] On
> Behalf Of Ed Morrison
> Sent: Monday, January 15, 2007 4:04 PM
> To: CentOS mailing list
> Subject: [CentOS] Server Install Eth0 & Eth1 not working
>
> Hi Everyone:
>
> I installed CentOS 4.4 on a new Dell 2950 using the server cd. No
> errors during the installation and no errors on bootup when loading the
> Eth0 or Eth1 interfaces. I currently have iptables stopped and selinux
> disabled. The interfaces have been given a static ip (192.168.1.x).
> the subnet is 255.255.255.0 and the gateway is 192.168.1.1. I can not
> ping any device on my network including the gateway. I can ping
> 127.0.0.1 and the 192.168.1.x. After trying to ping another device
> ifconfig will show that on ifcfg-lo transmit and receive packets of 389
> or some other number depending on how many ping packets were sent.
> Ifcfg-th0 or Ifcfg-eth1 will not show any TX or RX packets.
>
> The box was ordered to support RH from Dell. The NIC is an embedded
> dual port Broadcom NetXtreme II5708 GigabitEthernet NIC. I've replaced
> all network cables and the ports to where they connect into the switch
> and even a different switch and it still will not show me any love.
>
There are many issues on the lists.dell.com concerning the broadcom
cards. As an example:
http://lists.us.dell.com/pipermail/linux-poweredge/2004-October/thread.html#16951
I just checked all my dell servers (I have many) ... but most seem to have intel gigbit NICs.
"Intel Corporation 82541GI/PI Gigabit Ethernet Controller" on most.
Well ... I have this on one machine and it seems to be working OK:
"Broadcom Corporation NetXtreme BCM5721 Gigabit Ethernet PCI Express"
If you use these search terms on google, you will see many issues with broadcom cards on RHEL:
"site:http://lists.us.dell.com/pipermail/linux-poweredge/ tg3"
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://lists.centos.org/pipermail/centos/attachments/20070115/27a863f9/attachment.sig>
More information about the CentOS
mailing list