[CentOS] CentOS4 and older megaraid - SOLVED

Matt Hyclak

hyclak at math.ohiou.edu
Mon Jan 22 21:09:28 UTC 2007


On Tue, Jan 23, 2007 at 07:56:32AM +1100, David Booth enlightened us:
> Here is my recipe, tried and true, to compile and load megaraid.ko for 
> HP Netserver LP 1000r using kernel-devel-2.6.9-42.EL and 
> kernel-smp-devel-2.6.9-42.EL which matches my install disk, 
> Centos4.4Final i386 Disk 1 of 4.
> 
> If you update the kernel after this you have to do it all again!
> 
> Sources:
> http://www.tuxyturvy.com/blog/index.php?/archives/4-Installing-RHEL4-on-Systems-with-Legacy-Megaraid-Drivers.html
> http://lists.centos.org/pipermail/centos/2005-August/010021.html
> 
> # START
> # Install Centos4.4 on an old system with floppy, net and PCI HD
> #
> mkdir /usr/src/software
> cd /usr/src/software
> wget http://www.tuxyturvy.com/files/megaraid2.tar.bz2
> mkdir /usr/src/megaraid
> cd /usr/src/megaraid
> tar jxvfp /usr/src/sofware/megaraid2.tar.bz2
> #
> yum install kernel-devel-2.6.9-42.EL.i686
> yum install kernel-smp-devel-2.6.9-42.EL.i686
> #
> cd /usr/src
> mkdir megaraid
> cd megaraid
> tar jxvfp /usr/src/sofware/megaraid2.tar.bz2
> make -C /lib/modules/2.6.9-42.EL/build SUBDIRS=/usr/src/megaraid modules
> cd /usr/src
> mv megaraid megaraid-686
> mkdir megaraid
> cd megaraid
> tar jxvfp /usr/src/sofware/megaraid2.tar.bz2
> make -C /lib/modules/2.6.9-42.ELsmp/build SUBDIRS=/usr/src/megaraid modules
> mv megaraid megaraid-smp-686
> #
> # copy megaraid.ko to a floppies and label
> # insert new disk
> mformat a:
> mount /media/floppy
> cp /usr/src/megaraid-686/megaraid.ko /media/floppy
> umount /media/floppy
> # Label it megaraidUP686
> # insert new disk
> mformat a:
> mount /media/floppy
> cp /usr/src/megaraid-smp-686/megaraid.ko /media/floppy
> umount /media/floppy
> # Label it megaraidSMP686
> #
> # Now have 2 disks with megaraid.ko
> #
> # On the SCSI system, start the install with
> linux
> # and get to 'no suitable disk'
> #
> Alt-F2
> rmmod megaraid_mbox
> rmmod megaraid_mm
> # insert the labelled megaraidUP686
> mkdir /mnt/floppy
> mount /dev/fd0 /mnt/floppy
> insmod /mnt/floppy/megaraid.ko
> # Verify that the module loaded
> lsmod
> # see if megaraid is listed
> # Verify that your RAID array was found
> Alt-F4
> # look for 'megaraid' in the output from the module load
> # switch back to the normal install screen
> Alt-F1
> # Since you've manually loaded the driver from the command prompt
> # ignore the instructions to pick a driver. Continue the install.
> # After all packages are installed and the system prompts you to reboot:
> ! DON"T DO IT!
> # Because the megaraid driver was installed manually the installer will
> # not build a proper initrd.
> # Fix this before the reboot right now with the following steps:
> #
> # switch from the GUI to a bash prompt
> Alt-F2
> # megaraidUP686 floppy is`still in the floppy drive
> cp /mnt/floppy/megaraid.ko 
> /mnt/sysimage/lib/modules/2.6.9-42.EL/kernel/drivers/scsi
> umount /mnt/floppy
> # Insert floppy labelled megaraidSMP686
> mount /dev/fd0 /media/floppy
> # Copy the smp megaraid.ko module
> cp /media/floppy/megaraid.ko 
> /mnt/sysimage/lib/modules/2.6.9-42.ELsmp/kernel/drivers/scsi
> # set root to your newly installed system image
> chroot /mnt/sysimage
> vi /etc/modprobe.conf
> # make the line with 'alias scsi_hostadapter' say
> alias scsi_hostadapter megaraid
> # Save the file.
> :wq
> #Switch to the /boot directory
> cd /boot
> #Create new initrd files
> /sbin/mkinitrd initrd-2.6.9-42.EL.img.megaraid 2.6.9-42.EL
> /sbin/mkinitrd initrd-2.6.9-42.ELsmp.img.megaraid 2.6.9-42.ELsmp
> #
> #Copy the new initrd over old initrd
> cp initrd-2.6.9-42.EL.img.megaraid initrd-2.6.42-EL.img
> cp initrd-2.6.9-42.EL.img.megaraid initrd-2.6.42-ELsmp.img
> # Exit chroot environment
> exit
> # Switch back to the GUI installer
> Alt-F1
> reboot
> # FINISH

Looks great to me. Can you get this on the Wiki?

Matt

-- 
Matt Hyclak
Department of Mathematics 
Department of Social Work
Ohio University
(740) 593-1263



More information about the CentOS mailing list