> -----Original Message----- > From: centos-bounces at centos.org > [mailto:centos-bounces at centos.org] On Behalf Of Matt Hyclak > Sent: Tuesday, January 02, 2007 1:00 PM > To: CentOS mailing list > Subject: Re: [CentOS] PDFlib? > > On Sun, Dec 31, 2006 at 10:25:07AM -0600, Mike Kercher enlightened us: > > > -----Original Message----- > > > From: centos-bounces at centos.org > > > [mailto:centos-bounces at centos.org] On Behalf Of Matt Hyclak > > > Sent: Saturday, December 30, 2006 10:01 PM > > > To: CentOS mailing list > > > Subject: Re: [CentOS] PDFlib? > > > > > > On Sat, Dec 30, 2006 at 05:09:57PM -0600, Mike Kercher > enlightened us: > > > > I'm trying to create pdf's on the fly with php, but I'm > > > getting errors > > > > such as: > > > > > > > > Fatal error: Call to undefined function: pdf_new() > > > > > > > > I tried installing pdflib from dag, but I think I'm missing > > > something > > > > to plug it into php. > > > > > > > > Has anyone done this? > > > > > > > > > > Yes, the PDFlib in dag's repo isn't for php, if I remember > > > correctly. I ended up building PDFlib-Lite from the website using > > > the SRPM from pld linux, then updated the php-pecl-pdflib > RPM from > > > rpmforge (dag) to 2.1.2 and installed that. > > > > > > I'm no longer using them in production, but I've still got spec > > > files if you need some guidance. > > > > > > Matt > > > > > Matt, > > > > Thanks for the info. I would be very interested in your > .spec files > > and any other guidance you may have. > > > > Sorry, I've been out with the holidays and all. I've attached > the src.rpm for php-pecl-pdflib and a .nosrc.rpm for > PDFLib-Lite. You'll have to download PDFLib-Lite 6.0.3 from > their website to rebuild, but that should get you in the > right direction. > > HTH, > > Matt > > -- Thanks for all of the help guys! I think I actually got it working yesterday by doing a pear install pdflib and then installing a php-pecl-pdflib rpm for FC3. I'm going to try rebuilding these .src.rpm's so I have a cleaner installation. Thanks again! Mike