On 1/9/07, Theo Band [Xanadu Wireless] <theo.band at xanadu-wireless.com> wrote: > I try to setup networking with a fresh CENTOS4.4 installation. Upto now > I have 20 installations, most of them FC3/FC4 and RHEL3. > I noticed that the default gateway is not setup properly when using Centos. > > [root at raaf ~]# route > Kernel IP routing table > Destination Gateway Genmask Flags Metric Ref Use > Iface > 192.168.101.0 * 255.255.255.0 U 0 0 0 eth1 > 169.254.0.0 * 255.255.0.0 U 0 0 0 eth1 > default 192.168.101.1 0.0.0.0 UG 1 0 0 eth1 > > Networking is setup done by using dhcp, and this seems to work OK. > Problem is however that the gateway should be 192.168.101.2 and not > 192.168.101.1 (does not exist). If I manually add the gateway, > networking is OK: Sounds like you need to fix your dhcp server so that it hands out the proper information. -- During times of universal deceit, telling the truth becomes a revolutionary act. George Orwell