The first point is the bios will emulate PATA mode and let the SATA drives stay connected to the SATA ports. See if that is on option on your motherboard. Don Levey wrote: > That may be the way to go. I'm working on getting a DVD for FC6 x86_64 so > we'll see how that goes. In the meantime, this link: > http://linuxmafia.com/faq/Hardware/sata.html > has *some* (but not a lot) of info on the VIA8251 in particular; there is a > wealth of info on SATA on Linux in general. In short, it presents three > possible workarounds: > > 1. Switch the motherboard BIOS back to "legacy ATA mode" (parallel ATA = > PATA). Complete a Linux installation. Fetch or build a kernel with support > for your chipset. Switch the BIOS setting back. (Potential catch: It's > claimed that Dell Optiplex GX270 and Dell Precision Workstation 360 desktop > units, using Intel ICH5 SATA-I chipsets, don't support switching to legacy > ATA mode. This might be true of some others.) > > 2. Rebuild your installer using kernel 2.4.27 or later, which includes > libata, desirable since it adds many new chipsets and gives a (potential, > subject to physical read limits, etc.) ~10M/s speed boost to some others > compared to the quite slow 2.4.x drivers/ide set. > > 3. Temporarily add a regular PATA drive to your system. Install Linux onto > that. Fetch or build a kernel with support for your chipset. Migrate your > system to the SATA drives. > > > The first doesn't seem to be an option in terms of switching the SATA > interfaces to PATA mode. The drives themselves are SATA, of course, so I > can't just plug them into the PATA interfaces on the boards. > > The second is a little outdated, since CentOS uses a 2.6 kernel and seems to > have SATA/libata capability. > > The third is a possiblity, if I can find a kernel within the CentOS/RedHat > umbrella that will support the chipset. I know I can build or find one on > my own, but don't want to have to rebuild each time a new > kernel/enhancement/vulnerability comes out. > > -Don > > -----Original Message----- > From: centos-bounces at centos.org [mailto:centos-bounces at centos.org]On > Behalf Of Will McDonald > Sent: Wednesday, January 17, 2007 11:30 AM > To: CentOS mailing list > Subject: Re: [CentOS] Centos 4.4 install on ASUS A8V-VM does not > findSATAdrives > > > On 17/01/07, Don Levey <centos at the-leveys.us> wrote: >> On Wed, 2007-01-17 at 10:37 -0500, Don Levey wrote: >>> No go, unfortunately. Even under factory settings, using promise_sata >> (and >>> promise_sx4, for that matter), CentOS 4.4 won't install. Time for a new >>> board, I guess. >>> -Don >>> >> One last thing ... try a bios upgrade to the latest from the >> manufacturer > >> Already at version 401 (the latest from ASUS). They *do* offer a VIA SATA >> driver for Linux, and that may help if I can get it on the install DVD. > > Will FC3 or later install on it? It's possible (though no doubt a > bunch of work) to hack together an installer with extended/custom > device support in its initrd. Of course then you'd need to ensure the > installed kernel had similar extended functionality/updated hardware > support. > > You could always try the latest FC variant until CentOS 5 is available > then try rebuilding the server with that? And with that in mind you > could layout your partitions accordingly so any custom data is still > local even after a reinstall. > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > > -- My "Foundation" verse: Isa 54:17 No weapon that is formed against thee shall prosper; and every tongue that shall rise against thee in judgment thou shalt condemn. This is the heritage of the servants of the LORD, and their righteousness is of me, saith the LORD. -- carpe ductum -- "Grab the tape" CDTT (Certified Duct Tape Technician) Linux user #322099 Machines: 206822 256638 276825 http://counter.li.org/