Todd Cary (todd at aristesoftware.com) napisał(a): > I was able to remove the NTFS partition and repartition the HD as a type > Linux (83). Next I created the ext3 file system. > > If I reboot with the USB drive attached, the boot process hangs, however > if I turn off the drive, boot and then turn it on, all is fine. > > # cat /etc/fstab > > shows the drive, but I am not sure how to use it for a backup nor do I > know how to access it. Any help would be appreciated. The drive is > /dev/sda1. > >From terminal You can do: mkdir /mnt/usb mount /dev/sda1 /mnt/usb and You will have Your stick in /mnt/usb After You finish Your work, You can umount /mnt/usb hth -- Marcin Mazurek http://www.netsync.pl/ - :::: - nic-hdl: MM3380-RIPE GnuPG 6687 E661 98B0 AEE6 DA8B 7F48 AEE4 776F 5688 DC89