>Message: 23 >Date: Fri, 13 Jul 2007 22:11:59 -0400 >From: Dan Halbert <halbert at everyzing.com> >Subject: Re: [CentOS] Newbie ADSL configuration, ppp0 can't activate & > config not found >To: CentOS mailing list <centos at centos.org> >Message-ID: <469830EF.3080601 at everyzing.com> mailing-lists at computer2.com wrote: <snip> If you have a router, then the ADSL connection you have is handled by the router, and is invisible to you, on the LAN side of the router. The router could be connecting to the WAN via a piece of wet string, as far as you care. So you should just have eth0 do DHCP and leave it connected to the router. You'll get an address like 192.168.1.2 from the router. You don't need ppp0 at all; to Centos the router appears like a LAN that routes to the Internet. In Windows, do "ipconfig" in a Command window, and you'll see what I mean. You should see something similar with ifconfig in Centos. Dan: Thank you for replying! I will try what you suggested, ASAP. Yesterday was Friday the 13th.... I need to get this working, before I try to get my Firewall/Router working! Lanny