Hi, I installed mrtg on centos5 with 14all.cgi script. I downloaded it from below URL. http://my14all.sourceforge.net/14all-1.1.txt and copies it as 14all.cgi @ /var/www/cg-bin I made a few changes to the script. Those changes can be seen in BOLDletteres. # if MRTG_lib.pm (from mrtg) is not in the module search path (@INC) # uncomment the following line and change the path appropriatly: #use lib qw(/usr/local/mrtg-2/lib/mrtg2); use lib qw(/usr/lib/mrtg2); # if RRDs (rrdtool perl module) is not in the module search path (@INC) # uncomment the following line and change the path appropriatly # or use a LibAdd: setting in the config file #use lib qw(/usr/local/rrdtool-1.0.38/lib/perl); use lib qw(/usr/lib/perl5/vendor_perl/5.8.8/i386-linux-thread-multi); ### where the mrtg.cfg file is # anywhere in the filespace #$cfgfile = '/home/mrtg/mrtg.cfg'; #$cfgfile = '/etc/mrtg/mrtg.cfg'; # relative to the script $cfgfile = ' mrtg.cfg'; # use this so 14all.cgi gets the cfgfile name from the script name #(14all.cgi -> 14all.cfg) #$cfgfile = 'mrtg.cfg'; It works fine. But When this server comes up , after rebooting, the traffic of the First graph (i.e Daily' graph (5 Minute Average) goes up, both incoming and outgoing traffic go up to 50-60 Mbits per secrond. This happened, Whenever the system comes up after a reboot. Any idea to solve this issue? Unless it reboots, It works fine. Also, I want to know, Where is this mtrg date stored? I want to back up data. If the system crashes one day, then, I will be able to retrieve it. -- Thank you Indunil Jayasooriya -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20070730/56de004f/attachment-0005.html>