I am trying to get JPilot working. I have configed gnome-pilot-applet, but it is not talking to the USB connected Treo650. My Treo has my name as the user, so from the applet, I see also a userid (my UID on this system it seems). I try to put that on the Treo and nothing happens. I have enabled the Backup Conduit. I am using /dev/pilot, which shows up when my Treo is connected via its USB syncing cable. In JPilot in settings, I specify /dev/pilot I go install user and install the same user as in the pilot-applet. I click on sync and press the sync button on the cable and I watch all the files get backed up to my /MyPilot directory (used from pilot-applet). But NOTHING shows up in J-Pilot. Everything is still there on the Treo.... Any thoughts? /var/log/messages shows the following in conjunction with a Sync: Jun 26 10:55:24 nc4010 kernel: usb 1-2: new full speed USB device using ohci_hcd and address 11 Jun 26 10:55:24 nc4010 kernel: usb 1-2: configuration #1 chosen from 1 choice Jun 26 10:55:24 nc4010 kernel: visor 1-2:1.0: Handspring Visor / Palm OS convert er detected Jun 26 10:55:24 nc4010 kernel: usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB0 Jun 26 10:55:24 nc4010 kernel: usb 1-2: Handspring Visor / Palm OS converter now attached to ttyUSB1 Jun 26 10:55:47 nc4010 kernel: usb 1-2: USB disconnect, address 11 Jun 26 10:55:47 nc4010 kernel: visor 1-2:1.0: device disconnected Sync runs nicely, the files on the Treo are backed up to the director specified in