Guolin Cheng wrote: > Mogens, > > The Booting Sequence problem is described below: > > Two types of NICs are installed on one machine, BIOS/PXE boots from one > type, but after that Linux/Kickstart kernel detect another type NIC as > eth0 and trying to install from that unconnected NIC. You don't need a custom kernel to fix this problem. If the interface from which you've PXE booted is named eth1, you can fix the installation by appending "ksdevice=eth1" to the append line in the pxelinux.cfg/default file. Mogens -- Mogens Kjaer, Carlsberg A/S, Computer Department Gamle Carlsberg Vej 10, DK-2500 Valby, Denmark Phone: +45 33 27 53 25, Fax: +45 33 27 47 08 Email: mk at crc.dk Homepage: http://www.crc.dk