It may sound a bit strange but I had a similar problem with an ASUS mobo with a Via chipset a long time ago and that problem was actually related to the dynamic discovery of memory clocking speeds. For some reason it was negotiating a higher memory clocking speed then the memory supported. What ended up fixing the issue was going into the BIOS and statically assigning the memory clocking speed. Of course the downside to this is that this setting would need to be changed anytime you upgrade your memory some with a different clocking rate. It may not be what you're experiencing but maybe worth a shot. How far into the boot process does your computers reboot again? Justin. -----Original Message----- From: centos at 911networks.com [mailto:centos at 911networks.com] Sent: Sunday, March 18, 2007 10:44 AM To: CentOS mailing list Subject: [CentOS] Centos 4 on Terminator C3 I am trying to install Centos 4 on an Asus terminator c3 with the via chipset. It keeps on rebooting. It won't install. It's a P3 800Mhz made by Via with 512Mb RAM. I have searched and found nothing about it. Any suggestion? -- Thanks _______________________________________________ CentOS mailing list CentOS at centos.org http://lists.centos.org/mailman/listinfo/centos