[CentOS] CentOS 5 ssloooowww when network unavailable

Sat May 19 01:00:58 UTC 2007
Mark Nejedlo <nejedlo at cs.wisc.edu>

I've been having a similar problem and wanted to provide what hopefully
is additional useful information.  Like the original poster, things seem
OK when booting with the network active.  However, network access is
extremely slow and timeouts are likely.  If I do a service network stop,
everything slows down, and keyboard and mouse activity is likely to be
dropped.  I also get error output which is included below.  Booting with
irqpoll doesn't seem to have any effect.

Of note is that my ethernet driver (r1000) is source built, not a driver
included with the build.  However, this driver was fine under CentOS 4.4.

Let me know what other information may be useful.  Thanks

Mark

-----
irq 177: nobody cared (try booting with the "irqpoll" option)
  [<c044aacb>] __report_bad_irq+0x2b/0x69
  [<c044acb8>] note_interrupt+0x1af/0x1e7
  [<c0570092>] usb_hcd_irq+0x23/0x50
  [<c044a2ff>] handle_IRQ_event+0x23/0x49
  [<c044a3d8>] __do_IRQ+0xb3/0xe8
  [<c04063f4>] do_IRQ+0x93/0xae
  [<c040492e>] common_interrupt+0x1a/0x20
  [<c045a83d>] __handle_mm_fault+0x7d/0x87b
  [<c04b8ea8>] avc_has_perm+0x3a/0x44
  [<c05fd4ef>] do_page_fault+0x20a/0x4b8
  [<c05fd2e5>] do_page_fault+0x0/0x4b8
  [<c0404a71>] error_code+0x39/0x40
  [<c04df804>] __copy_to_user_ll+0xd3/0xda
  [<c0429957>] do_proc_dointvec+0x1ee/0x291
  [<c0429a94>] proc_dointvec+0x15/0x19
  [<c0428c9c>] do_proc_dointvec_conv+0x0/0x36
  [<c0429134>] do_rw_proc+0xaa/0xee
  [<c042918e>] proc_readsys+0x0/0x13
  [<c042919e>] proc_readsys+0x10/0x13
  [<c046af3c>] vfs_read+0x9f/0x141
  [<c046b38a>] sys_read+0x3c/0x63
  [<c0403eff>] syscall_call+0x7/0xb
  =======================
handlers:
[<c057006f>] (usb_hcd_irq+0x0/0x50)
Disabling IRQ #177