>>> >>> Try adding nohide as an option to /etc/exports. See exports(5) for >>> more information about nohide and exporting filesystems with mount >>> points. >>> >> >> Most interesting. >> >> >> Looked, and applied... >> >> >> no change.. >> >> these are the relevant lines in the /etc/exports >> >> /data/shared/ 172.16.1.0/255.255.255.0(sync,rw,nohide) >> /data/shared/ 172.16.4.0/255.255.255.0(sync,rw,nohide) >> Hi, I was under the impression that nfs exports a filesystem in its entirety. Therefore, if you have another filesytem mounted in a subdirectory, you have to export it too, as it will not be exported for you. You therefore might have to have two entries: /data/shared/ 172.16.1.0/255.255.255.0(sync,rw,nohide) /data/shared/Photos/Archive1 172.16.1.0/255.255.255.0(sync,ro) I hope that helps. If nohide does not work, then you will have you use two mounts on the clients. A. >> >> (need to export to different subnets, anything else doesn't work) >> >> >> Cheers >> > > Did have another look at the nohide option after some sleep, and there > is a rather special caveat... > > <quote> > The nohide option is currently only effective on single host exports. > It does not work reliably with netgroup, subnet, or wildcard exports. > </quote> > > > Not really good enough as this data needs to be exported to a whole lot > of machines, i.e. two subnets.. > > Any other thoughts ? > > > AM > > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > >