Fung wrote: > Hi All, > > > I install CentOS 4.4 without additional driver disk. > When I partition the disk, I create nothing on the raid 5, and I just > create " / " " /boot " and "swap" on the raid 1. > > And it works. > > When I create a mount point /storage on the raid 5 and create " / " " > /boot " and "swap" on the raid 1. > > The error comes again, saying that there are inconsistency on the raid > /dev/sdb1 > > What should I do? I'm not entirely sure what you mean? Are you using hardware raid or software? I have completed both C4.4 and C5 installs on 2 separate PE2950's. In both cases, I used the hardware raid controller with 3 drives in raid5 with no problems. I would recommend using the hw-raid controller as the support seems pretty good. > Regards, > Fung Rick