On 5/23/07, Stephen John Smoogen <smooge at gmail.com> wrote: > On 5/23/07, James Olin Oden <james.oden at gmail.com> wrote: > > It gets all the way through the install, and then when it reboots, > > grub can't find the kernel. Grub can't find the kernel because the > > kernel was not instaled for some reason? I looked at the box through > > rescue mode and in /boot there is no kernel. > > > > Any ideas what might have happened? > > > > No idea without some idea about any errors generated during the > install, what kind of x86_64 hardware (cpu, mb, memory, disk type), > and what a simple install is, and if there were any errors listed in > the /root/*log files. The failure mode is so dramatic that I was wondering if in general if anyone has seen this before. As it turn out rpm for all intensive purposes died, and anaconda itself never caught the errors. First you start to see over and ove in the install.log: error: db4 error(22) from dbcursor->c_close: Invalid argument And then it switches to: error: db4 error(-30977) from dbcursor->c_put: DB_RUNRECOVERY: Fatal error, run database recovery error: error(-30977) storing record p^L^^oêJ·^Tm^P¥Å~B¬~Sß0û into Filemd5s this repeats for a while (with different records of course), but then degrades/stabalizes too repeated: error: db4 error(-30977) from db->sync: DB_RUNRECOVERY: Fatal error, run database recovery Essentially, I'm getting errors concerning the integrity of the rpm db mid rpm transaction during the install. I don't know if this is repeatable, at this point. I suspect the type of hardware is irrelevant (though I know its not completely ruled out). I suspect it could be a memory problem, but also recall an issue with mmap that effect rpm in this way (more to the point Jeff Johnson muttered something about that as he was looking at it) Again has anyone seen this? Thanks...james