Hello,
The error is in my original posting, md the raid arrays are not
synchronized.
Checking /proc/mdstat output is below, doesn't look to me like trouble.
Thanks.
Dave.
Personalities : [raid0] [raid1] [raid6] [raid5] [raid4]
md1 : active raid1 hdb1[1] hda1[0]
102208 blocks [2/2] [UU]
md3 : active raid1 hdb5[1] hda5[0]
1036096 blocks [2/2] [UU]
md0 : active raid1 hdb3[1] hda3[0]
522048 blocks [2/2] [UU]
md2 : active raid1 hdb2[1] hda2[0]
8337664 blocks [2/2] [UU]
unused devices: <none>
----- Original Message -----
From: "Scott Silva" <ssilva at sgvwater.com>
To: <centos at centos.org>
Sent: Wednesday, November 28, 2007 5:13 PM
Subject: [CentOS] Re: CentOS /boot kernel files removed after rpm upgrades
> on 11/28/2007 12:30 PM Dave spake the following:
>> Hello,
>> Forgive this if it's a repost.
>> The issue with my kernel has been solved, but now i have an out of
>> synchronization raid1 array. To fix the original problem i had to boot in
>> rescue mode, i uninstalled and reinstalled the kernel, that put the files
>> back in /boot, but it didn't put the grub.conf back together. So i got
>> one from another centos box and added in what i needed. I rebooted, now
>> i'm getting errors from md, the array is out of sync. Anyone have a fix
>> for this?
>> Thanks.
> What is the exact error?
> cat /proc/mdstat might give some clues.
>
> --
> MailScanner is like deodorant...
> You hope everybody uses it, and
> you notice quickly if they don't!!!!
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos