[CentOS] Offtopic: help with an iPod
Manuel Enrique Chavez Manzano
manny at cmc.cfg.sld.cuThu Oct 18 00:02:12 UTC 2007
- Previous message: [CentOS] NIS problems
- Next message: [CentOS] Re: Offtopic: help with an iPod
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
A friend bring and Ipod, initially it didn't start because of charge, so
I connected to my PC to give some charge, after that my linux didn't
mount it, and when I start the iPod it shows me a folder with a sign,
and that's all, nothing else matters. when I connected the iPod to the
PC it start to charge and suddenly stops and shows the folder I have
talked before
I run the command <dmesg> and show me some error, I attach what that
command show me.
I can't mount the iPod neither, I want to know if is there a way to
force to mount the iPod
I need some help with that
--
"Nuestra recompensa se encuentra en el esfuerzo y no en el resultado.
Un esfuerzo total es una victoria completa".
Mahatma Gandhi
(@ @)
|------o00o-(_)-o00o----------|
|Manuel Enrique Chávez Manzano|
|manuel864 at gmail.com |
|manny at cmc.cfg.sld.cu |
|GNU/LINUX User |
|#424754 |
|Using CentOS 5 |
|-------ooo--ooo--------------|
-------------- next part --------------
Linux version 2.6.18-8.1.14.el5 (mockbuild at builder7.centos.org) (gcc version 4.1.1 20070105 (Red Hat 4.1.1-52)) #1 SMP Thu Sep 27 18:58:54 EDT 2007
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000000dfb0000 (usable)
BIOS-e820: 000000000dfb0000 - 000000000dfc0000 (ACPI data)
BIOS-e820: 000000000dfc0000 - 000000000dff0000 (ACPI NVS)
BIOS-e820: 000000000dff0000 - 000000000e000000 (reserved)
BIOS-e820: 00000000ff780000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
223MB LOWMEM available.
found SMP MP-table at 000ff780
Using x86 segment limits to approximate NX protection
On node 0 totalpages: 57264
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 53168 pages, LIFO batch:15
DMI 2.3 present.
Using APIC driver default
ACPI: RSDP (v000 ACPIAM ) @ 0x000fad80
ACPI: RSDT (v001 A M I OEMRSDT 0x01000625 MSFT 0x00000097) @ 0x0dfb0000
ACPI: FADT (v002 A M I OEMFACP 0x01000625 MSFT 0x00000097) @ 0x0dfb0200
ACPI: MADT (v001 A M I OEMAPIC 0x01000625 MSFT 0x00000097) @ 0x0dfb0390
ACPI: OEMB (v001 A M I AMI_OEM 0x01000625 MSFT 0x00000097) @ 0x0dfc0040
ACPI: DSDT (v001 100XX 100XX001 0x00000001 INTL 0x02002026) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
Processor #0 15:4 APIC version 20
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 10000000 (gap: 0e000000:f1780000)
Detected 2919.094 MHz processor.
Built 1 zonelists. Total pages: 57264
Kernel command line: ro root=/dev/VolGroup00/LogVol00
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
CPU 0 irqstacks, hard=c0737000 soft=c0717000
PID hash table entries: 1024 (order: 10, 4096 bytes)
Console: colour VGA+ 80x25
Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
Memory: 220248k/229056k available (2043k kernel code, 8244k reserved, 846k data, 232k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5839.85 BogoMIPS (lpj=2919925)
Security Framework v1.0.0 initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
selinux_register_security: Registering secondary module capability
Capability LSM initialized as secondary
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000001
CPU: After vendor identify, caps: bfebfbff 20000000 00000000 00000000 0000651d 00000000 00000001
monitor/mwait feature present.
using mwait in idle threads.
CPU: Trace cache: 12K uops, L1 D cache: 16K
CPU: L2 cache: 256K
CPU: Hyper-Threading is disabled
CPU: After all inits, caps: bfebf3ff 20000000 00000000 00000180 0000651d 00000000 00000001
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU0: Intel P4/Xeon Extended MCE MSRs (24) available
CPU0: Thermal monitoring enabled
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
Freeing SMP alternatives: 16k freed
ACPI: Core revision 20060707
CPU0: Intel(R) Celeron(R) CPU 2.93GHz stepping 09
Total of 1 processors activated (5839.85 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
Brought up 1 CPUs
sizeof(vma)=84 bytes
sizeof(page)=32 bytes
sizeof(inode)=340 bytes
sizeof(dentry)=136 bytes
sizeof(ext3inode)=492 bytes
sizeof(buffer_head)=52 bytes
sizeof(skbuff)=172 bytes
checking if image is initramfs... it is
Freeing initrd memory: 2262k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xf0031, last bus=1
PCI: Using configuration type 1
Setting up standard PCI resources
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:02.5
Boot video device is 0000:01:00.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 10 *11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 15 devices
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
pnp: 00:09: ioport range 0x290-0x297 has been reserved
pnp: 00:0b: ioport range 0x900-0x90f has been reserved
PCI: Ignore bogus resource 6 [0:0] of 0000:01:00.0
PCI: Bridge: 0000:00:01.0
IO window: d000-dfff
MEM window: dfe00000-dfefffff
PREFETCH window: cfd00000-dfcfffff
NET: Registered protocol family 2
IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
TCP: Hash tables configured (established 8192 bind 4096)
TCP reno registered
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1192569004.644:1): initialized
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
SELinux: Registering netfilter hooks
Initializing Cryptographic API
ksign: Installing public key data
Loading keyring
- Added public key 9D84EDE83706E02F
- User ID: CentOS (Kernel Module GPG key)
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
ACPI: Invalid PBLK length [0]
ACPI Exception (acpi_processor-0681): AE_NOT_FOUND, Processor Device is not present [20060707]
ACPI: Getting cpuindex for acpiid 0x2
Real Time Clock Driver v1.12ac
Non-volatile memory driver v1.2
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected SiS 661 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 0000:00:02.5
ACPI: PCI Interrupt 0000:00:02.5[A] -> GSI 16 (level, low) -> IRQ 169
SIS5513: chipset revision 1
SIS5513: not 100% native mode: will probe irqs later
SIS5513: SiS 962/963 MuTIOL IDE UDMA133 controller
ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: ASUS CD-S520B, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
Probing IDE interface ide1...
ide-floppy driver 0.99.newide
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
TCP bic registered
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
Using IPI No-Shortcut mode
Time: tsc clocksource has been installed.
ACPI: (supports S0 S1 S3 S4 S5)
Freeing unused kernel memory: 232k freed
Write protecting the kernel read-only data: 383k
input: AT Translated Set 2 keyboard as /class/input/input0
USB Universal Host Controller Interface driver v3.0
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
ACPI: PCI Interrupt 0000:00:03.0[A] -> GSI 20 (level, low) -> IRQ 177
ohci_hcd 0000:00:03.0: OHCI Host Controller
ohci_hcd 0000:00:03.0: new USB bus registered, assigned bus number 1
ohci_hcd 0000:00:03.0: irq 177, io mem 0xdfff4000
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:03.1[B] -> GSI 21 (level, low) -> IRQ 185
ohci_hcd 0000:00:03.1: OHCI Host Controller
ohci_hcd 0000:00:03.1: new USB bus registered, assigned bus number 2
ohci_hcd 0000:00:03.1: irq 185, io mem 0xdfff5000
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 3 ports detected
ACPI: PCI Interrupt 0000:00:03.2[C] -> GSI 22 (level, low) -> IRQ 193
ohci_hcd 0000:00:03.2: OHCI Host Controller
ohci_hcd 0000:00:03.2: new USB bus registered, assigned bus number 3
ohci_hcd 0000:00:03.2: irq 193, io mem 0xdfff6000
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:03.3[D] -> GSI 23 (level, low) -> IRQ 201
ehci_hcd 0000:00:03.3: EHCI Host Controller
ehci_hcd 0000:00:03.3: new USB bus registered, assigned bus number 4
PCI: cache line size of 128 is not supported by device 0000:00:03.3
ehci_hcd 0000:00:03.3: irq 201, io mem 0xdfff7000
ehci_hcd 0000:00:03.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb4: configuration #1 chosen from 1 choice
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 8 ports detected
input: ImPS/2 Logitech Wheel Mouse as /class/input/input1
SCSI subsystem initialized
libata version 2.00 loaded.
sata_sis 0000:00:05.0: version 0.6
ACPI: PCI Interrupt 0000:00:05.0[A] -> GSI 17 (level, low) -> IRQ 209
sata_sis 0000:00:05.0: Detected SiS 180/181 chipset in SATA mode
ata1: SATA max UDMA/133 cmd 0xEFF0 ctl 0xEFE6 bmdma 0xEF90 irq 209
ata2: SATA max UDMA/133 cmd 0xEFA8 ctl 0xEFE2 bmdma 0xEF98 irq 209
scsi0 : sata_sis
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata1.00: ATA-6, max UDMA/133, 156301488 sectors: LBA48 NCQ (depth 0/32)
ata1.00: ata1: dev 0 multi count 16
ata1.00: configured for UDMA/133
scsi1 : sata_sis
ata2: SATA link down (SStatus 0 SControl 300)
ATA: abnormal status 0x7F on port 0xEFAF
Vendor: ATA Model: ST380011AS Rev: 3.00
Type: Direct-Access ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
sda: Write Protect is off
sda: Mode Sense: 00 3a 00 00
SCSI device sda: drive cache: write back
sda: sda1 sda2
sd 0:0:0:0: Attached scsi disk sda
device-mapper: ioctl: 4.11.0-ioctl (2006-09-14) initialised: dm-devel at redhat.com
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
audit(1192569013.558:2): enforcing=1 old_enforcing=0 auid=4294967295
security: 3 users, 6 roles, 1587 types, 172 bools, 1 sens, 1024 cats
security: 59 classes, 49762 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev dm-0, type ext3), uses xattr
SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev eventpollfs, type eventpollfs), uses task SIDs
SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev cpuset, type cpuset), not configured for labeling
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
audit(1192569014.349:3): policy loaded auid=4294967295
hda: ATAPI 52X CD-ROM drive, 96kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
input: PC Speaker as /class/input/input2
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7 [PCSPP,TRISTATE,EPP]
8139too Fast Ethernet driver 0.9.27
ACPI: PCI Interrupt 0000:00:0b.0[A] -> GSI 19 (level, low) -> IRQ 217
eth0: RealTek RTL8139 at 0xce8e0c00, 00:17:31:16:06:72, IRQ 217
eth0: Identified 8139 chip type 'RTL-8100B/8139D'
8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
sd 0:0:0:0: Attached scsi generic sg0 type 0
ACPI: PCI Interrupt 0000:00:02.7[C] -> GSI 18 (level, low) -> IRQ 225
intel8x0_measure_ac97_clock: measured 50726 usecs
intel8x0: clocking to 48000
lp0: using parport0 (interrupt-driven).
lp0: console ready
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ibm_acpi: ec object not found
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
EXT3 FS on dm-0, internal journal
kjournald starting. Commit interval 5 seconds
EXT3 FS on sda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
SELinux: initialized (dev sda1, type ext3), uses xattr
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
Adding 458744k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:458744k
SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts
IA-32 Microcode Update Driver: v1.14a <tigran at veritas.com>
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2006 Netfilter Core Team
ip_tables: (C) 2000-2006 Netfilter Core Team
Netfilter messages via NETLINK v0.30.
ip_conntrack version 2.4 (1789 buckets, 14312 max) - 228 bytes per conntrack
process `sysctl' is using deprecated sysctl (syscall) net.ipv6.neigh.lo.retrans_time; Use net.ipv6.neigh.lo.retrans_time_ms instead.
eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
audit(1192569037.776:4): audit_pid=1884 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
vmmon: module license 'unspecified' taints kernel.
/dev/vmmon[2067]: Module vmmon: registered with major=10 minor=165
/dev/vmmon[2067]: Module vmmon: initialized
/dev/vmnet: open called by PID 2105 (vmnet-bridge)
/dev/vmnet: hub 0 does not exist, allocating memory.
/dev/vmnet: port on hub 0 successfully opened
bridge-eth0: enabling the bridge
bridge-eth0: up
bridge-eth0: already up
bridge-eth0: attached
/dev/vmnet: open called by PID 2119 (vmnet-natd)
/dev/vmnet: hub 8 does not exist, allocating memory.
/dev/vmnet: port on hub 8 successfully opened
eth0: no IPv6 routers present
Bluetooth: Core ver 2.10
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.8
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM ver 1.8
ppdev: user-space parallel port driver
Bluetooth: HIDP (Human Interface Emulation) ver 1.1
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
/dev/vmnet: open called by PID 2571 (vmnet-netifup)
/dev/vmnet: hub 1 does not exist, allocating memory.
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 2572 (vmnet-netifup)
/dev/vmnet: port on hub 8 successfully opened
/dev/vmnet: open called by PID 2597 (vmnet-dhcpd)
/dev/vmnet: port on hub 1 successfully opened
/dev/vmnet: open called by PID 2598 (vmnet-dhcpd)
/dev/vmnet: port on hub 8 successfully opened
vmnet1: no IPv6 routers present
vmnet8: no IPv6 routers present
usb 4-6: new high speed USB device using ehci_hcd and address 2
usb 4-6: configuration #1 chosen from 1 choice
Initializing USB Mass Storage driver...
scsi2 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 2
usb-storage: waiting for device to settle before scanning
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 2
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 2:0:0:0: Attached scsi removable disk sdb
sd 2:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 3
usb 4-6: configuration #1 chosen from 1 choice
scsi3 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 3
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 3
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 3:0:0:0: Attached scsi removable disk sdb
sd 3:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 4
usb 4-6: configuration #1 chosen from 1 choice
scsi4 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 4
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 4
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 4:0:0:0: Attached scsi removable disk sdb
sd 4:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 5
usb 4-6: configuration #1 chosen from 1 choice
scsi5 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 5
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 5
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 5:0:0:0: Attached scsi removable disk sdb
sd 5:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 6
usb 4-6: configuration #1 chosen from 1 choice
scsi6 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 6
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 6
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 6:0:0:0: Attached scsi removable disk sdb
sd 6:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 7
usb 4-6: configuration #1 chosen from 1 choice
scsi7 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 7
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 7
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 7:0:0:0: Attached scsi removable disk sdb
sd 7:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 8
usb 4-6: configuration #1 chosen from 1 choice
scsi8 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 8
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 8
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 8:0:0:0: Attached scsi removable disk sdb
sd 8:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 9
usb 4-6: configuration #1 chosen from 1 choice
scsi9 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 9
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 9
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 9:0:0:0: Attached scsi removable disk sdb
sd 9:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 10
usb 4-6: configuration #1 chosen from 1 choice
scsi10 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 10
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 10
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 10:0:0:0: Attached scsi removable disk sdb
sd 10:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 11
usb 4-6: configuration #1 chosen from 1 choice
scsi11 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 11
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 11
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 11:0:0:0: Attached scsi removable disk sdb
sd 11:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 12
usb 4-6: configuration #1 chosen from 1 choice
scsi12 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 12
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 12
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 12:0:0:0: Attached scsi removable disk sdb
sd 12:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 13
usb 4-6: configuration #1 chosen from 1 choice
scsi13 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 13
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 13
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 13:0:0:0: Attached scsi removable disk sdb
sd 13:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 14
usb 4-6: configuration #1 chosen from 1 choice
scsi14 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 14
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 14
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 14:0:0:0: Attached scsi removable disk sdb
sd 14:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 15
usb 4-6: configuration #1 chosen from 1 choice
scsi15 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 15
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 15
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 15:0:0:0: Attached scsi removable disk sdb
sd 15:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 16
usb 4-6: configuration #1 chosen from 1 choice
scsi16 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 16
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 16
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 16:0:0:0: Attached scsi removable disk sdb
sd 16:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 17
usb 4-6: configuration #1 chosen from 1 choice
scsi17 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 17
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 17
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 17:0:0:0: Attached scsi removable disk sdb
sd 17:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 18
usb 4-6: configuration #1 chosen from 1 choice
scsi18 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 18
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 18
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 18:0:0:0: Attached scsi removable disk sdb
sd 18:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 19
usb 4-6: configuration #1 chosen from 1 choice
scsi19 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 19
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 19
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 19:0:0:0: Attached scsi removable disk sdb
sd 19:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 20
usb 4-6: configuration #1 chosen from 1 choice
scsi20 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 20
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 20
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 20:0:0:0: Attached scsi removable disk sdb
sd 20:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-5: new high speed USB device using ehci_hcd and address 21
usb 4-5: configuration #1 chosen from 1 choice
scsi21 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 21
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DataTraveler 2.0 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 1970176 512-byte hdwr sectors (1009 MB)
sdb: Write Protect is off
sdb: Mode Sense: 0b 00 00 08
sdb: assuming drive cache: write through
SCSI device sdb: 1970176 512-byte hdwr sectors (1009 MB)
sdb: Write Protect is off
sdb: Mode Sense: 0b 00 00 08
sdb: assuming drive cache: write through
sdb: sdb1
sd 21:0:0:0: Attached scsi removable disk sdb
sd 21:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
usb 4-5: USB disconnect, address 21
usb 4-6: new high speed USB device using ehci_hcd and address 22
usb 4-6: configuration #1 chosen from 1 choice
scsi22 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 22
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DataTraveler 2.0 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 1970176 512-byte hdwr sectors (1009 MB)
sdb: Write Protect is off
sdb: Mode Sense: 0b 00 00 08
sdb: assuming drive cache: write through
SCSI device sdb: 1970176 512-byte hdwr sectors (1009 MB)
sdb: Write Protect is off
sdb: Mode Sense: 0b 00 00 08
sdb: assuming drive cache: write through
sdb: sdb1
sd 22:0:0:0: Attached scsi removable disk sdb
sd 22:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
usb 4-6: USB disconnect, address 22
usb 4-6: new high speed USB device using ehci_hcd and address 23
usb 4-6: configuration #1 chosen from 1 choice
scsi23 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 23
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DataTraveler 2.0 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 1970176 512-byte hdwr sectors (1009 MB)
sdb: Write Protect is off
sdb: Mode Sense: 0b 00 00 08
sdb: assuming drive cache: write through
SCSI device sdb: 1970176 512-byte hdwr sectors (1009 MB)
sdb: Write Protect is off
sdb: Mode Sense: 0b 00 00 08
sdb: assuming drive cache: write through
sdb: sdb1
sd 23:0:0:0: Attached scsi removable disk sdb
sd 23:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
usb 4-6: USB disconnect, address 23
usb 4-6: new high speed USB device using ehci_hcd and address 24
usb 4-6: configuration #1 chosen from 1 choice
scsi24 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 24
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DataTraveler 2.0 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 1970176 512-byte hdwr sectors (1009 MB)
sdb: Write Protect is off
sdb: Mode Sense: 0b 00 00 08
sdb: assuming drive cache: write through
SCSI device sdb: 1970176 512-byte hdwr sectors (1009 MB)
sdb: Write Protect is off
sdb: Mode Sense: 0b 00 00 08
sdb: assuming drive cache: write through
sdb: sdb1
sd 24:0:0:0: Attached scsi removable disk sdb
sd 24:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
usb 4-6: USB disconnect, address 24
usb 4-6: new high speed USB device using ehci_hcd and address 25
usb 4-6: configuration #1 chosen from 1 choice
scsi25 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 25
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 25
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 25:0:0:0: Attached scsi removable disk sdb
sd 25:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 26
usb 4-6: configuration #1 chosen from 1 choice
scsi26 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 26
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 26
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 26:0:0:0: Attached scsi removable disk sdb
sd 26:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 27
usb 4-6: configuration #1 chosen from 1 choice
scsi27 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 27
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 27
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 27:0:0:0: Attached scsi removable disk sdb
sd 27:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 28
usb 4-6: configuration #1 chosen from 1 choice
scsi28 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 28
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 28
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 28:0:0:0: Attached scsi removable disk sdb
sd 28:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 29
usb 4-6: configuration #1 chosen from 1 choice
scsi29 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 29
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-5: new high speed USB device using ehci_hcd and address 30
usb 4-5: configuration #1 chosen from 1 choice
scsi30 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 30
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DataTraveler 2.0 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdc: 1970176 512-byte hdwr sectors (1009 MB)
sdc: Write Protect is off
sdc: Mode Sense: 0b 00 00 08
sdc: assuming drive cache: write through
SCSI device sdc: 1970176 512-byte hdwr sectors (1009 MB)
sdc: Write Protect is off
sdc: Mode Sense: 0b 00 00 08
sdc: assuming drive cache: write through
sdc: sdc1
sd 30:0:0:0: Attached scsi removable disk sdc
sd 30:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
SELinux: initialized (dev sdc1, type vfat), uses genfs_contexts
usb 4-6: USB disconnect, address 29
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 29:0:0:0: Attached scsi removable disk sdb
sd 29:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 31
usb 4-6: configuration #1 chosen from 1 choice
scsi31 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 31
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 31
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 31:0:0:0: Attached scsi removable disk sdb
sd 31:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 32
usb 4-6: configuration #1 chosen from 1 choice
scsi32 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 32
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 32
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 32:0:0:0: Attached scsi removable disk sdb
sd 32:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 33
usb 4-6: configuration #1 chosen from 1 choice
scsi33 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 33
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 33
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 33:0:0:0: Attached scsi removable disk sdb
sd 33:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 34
usb 4-6: configuration #1 chosen from 1 choice
scsi34 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 34
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 34
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 34:0:0:0: Attached scsi removable disk sdb
sd 34:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 35
usb 4-6: configuration #1 chosen from 1 choice
scsi35 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 35
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 35
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 35:0:0:0: Attached scsi removable disk sdb
sd 35:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
usb 4-5: USB disconnect, address 30
usb 4-5: new high speed USB device using ehci_hcd and address 36
usb 4-5: configuration #1 chosen from 1 choice
scsi36 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 36
usb-storage: waiting for device to settle before scanning
Vendor: HP USB Model: Flash Drive-m100 Rev: 2.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdb: 2015231 512-byte hdwr sectors (1032 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 2015231 512-byte hdwr sectors (1032 MB)
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb: sdb1
sd 36:0:0:0: Attached scsi removable disk sdb
sd 36:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
usb 4-6: new high speed USB device using ehci_hcd and address 37
usb 4-6: configuration #1 chosen from 1 choice
scsi37 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 37
usb-storage: waiting for device to settle before scanning
Vendor: Kingston Model: DataTraveler 2.0 Rev: 1.00
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sdc: 1001472 512-byte hdwr sectors (513 MB)
sdc: Write Protect is off
sdc: Mode Sense: 0b 00 00 08
sdc: assuming drive cache: write through
SCSI device sdc: 1001472 512-byte hdwr sectors (513 MB)
sdc: Write Protect is off
sdc: Mode Sense: 0b 00 00 08
sdc: assuming drive cache: write through
sdc: sdc1
sd 37:0:0:0: Attached scsi removable disk sdc
sd 37:0:0:0: Attached scsi generic sg2 type 0
usb-storage: device scan complete
SELinux: initialized (dev sdc1, type vfat), uses genfs_contexts
usb 4-6: USB disconnect, address 37
SELinux: initialized (dev sdb1, type vfat), uses genfs_contexts
usb 4-5: USB disconnect, address 36
usb 4-6: new high speed USB device using ehci_hcd and address 38
usb 4-6: configuration #1 chosen from 1 choice
scsi38 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 38
usb-storage: waiting for device to settle before scanning
Vendor: SAMSUNG Model: MP0603H Rev: 0811
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sdb: 117304992 512-byte hdwr sectors (60060 MB)
sdb: test WP failed, assume Write Enabled
sdb: assuming drive cache: write through
SCSI device sdb: 117304992 512-byte hdwr sectors (60060 MB)
sdb: test WP failed, assume Write Enabled
sdb: assuming drive cache: write through
sdb: sdb1
sd 38:0:0:0: Attached scsi disk sdb
sd 38:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: USB disconnect, address 38
usb 4-6: new high speed USB device using ehci_hcd and address 39
usb 4-6: configuration #1 chosen from 1 choice
scsi39 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 39
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 39
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 39:0:0:0: Attached scsi removable disk sdb
sd 39:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 40
usb 4-6: configuration #1 chosen from 1 choice
scsi40 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 40
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 40
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 40:0:0:0: Attached scsi removable disk sdb
sd 40:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-5: new high speed USB device using ehci_hcd and address 41
usb 4-5: configuration #1 chosen from 1 choice
scsi41 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 41
usb-storage: waiting for device to settle before scanning
Vendor: SAMSUNG Model: MP0603H Rev: 0811
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sdb: 117304992 512-byte hdwr sectors (60060 MB)
sdb: test WP failed, assume Write Enabled
sdb: assuming drive cache: write through
SCSI device sdb: 117304992 512-byte hdwr sectors (60060 MB)
sdb: test WP failed, assume Write Enabled
sdb: assuming drive cache: write through
sdb: sdb1
sd 41:0:0:0: Attached scsi disk sdb
sd 41:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-5: USB disconnect, address 41
ISO 9660 Extensions: Microsoft Joliet Level 3
ISOFS: changing to secondary root
SELinux: initialized (dev hda, type iso9660), uses genfs_contexts
application gmplayer uses obsolete OSS audio interface
application nasd uses obsolete OSS audio interface
usb 4-6: new high speed USB device using ehci_hcd and address 42
usb 4-6: configuration #1 chosen from 1 choice
scsi42 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 42
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 42
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 42:0:0:0: Attached scsi removable disk sdb
sd 42:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 43
usb 4-6: configuration #1 chosen from 1 choice
scsi43 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 43
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 43
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 43:0:0:0: Attached scsi removable disk sdb
sd 43:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 44
usb 4-6: configuration #1 chosen from 1 choice
scsi44 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 44
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 44
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 44:0:0:0: Attached scsi removable disk sdb
sd 44:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 45
usb 4-6: configuration #1 chosen from 1 choice
scsi45 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 45
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 45
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 45:0:0:0: Attached scsi removable disk sdb
sd 45:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 46
usb 4-6: configuration #1 chosen from 1 choice
scsi46 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 46
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 46
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 46:0:0:0: Attached scsi removable disk sdb
sd 46:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 47
usb 4-6: configuration #1 chosen from 1 choice
scsi47 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 47
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 47
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 47:0:0:0: Attached scsi removable disk sdb
sd 47:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 48
usb 4-6: configuration #1 chosen from 1 choice
scsi48 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 48
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 48
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 48:0:0:0: Attached scsi removable disk sdb
sd 48:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 49
usb 4-6: configuration #1 chosen from 1 choice
scsi49 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 49
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 49
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 49:0:0:0: Attached scsi removable disk sdb
sd 49:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 50
usb 4-6: configuration #1 chosen from 1 choice
scsi50 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 50
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 50
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 50:0:0:0: Attached scsi removable disk sdb
sd 50:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 51
usb 4-6: configuration #1 chosen from 1 choice
scsi51 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 51
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 51
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 51:0:0:0: Attached scsi removable disk sdb
sd 51:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 52
usb 4-6: configuration #1 chosen from 1 choice
scsi52 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 52
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 52
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 52:0:0:0: Attached scsi removable disk sdb
sd 52:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 53
usb 4-6: configuration #1 chosen from 1 choice
scsi53 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 53
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 53
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 53:0:0:0: Attached scsi removable disk sdb
sd 53:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 54
usb 4-6: configuration #1 chosen from 1 choice
scsi54 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 54
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 54
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 54:0:0:0: Attached scsi removable disk sdb
sd 54:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 55
usb 4-6: configuration #1 chosen from 1 choice
scsi55 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 55
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 55
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 55:0:0:0: Attached scsi removable disk sdb
sd 55:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 56
usb 4-6: configuration #1 chosen from 1 choice
scsi56 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 56
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 56
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 56:0:0:0: Attached scsi removable disk sdb
sd 56:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 57
usb 4-6: configuration #1 chosen from 1 choice
scsi57 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 57
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 57
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
unknown partition table
sd 57:0:0:0: Attached scsi removable disk sdb
sd 57:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 58
usb 4-6: configuration #1 chosen from 1 choice
scsi58 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 58
usb-storage: waiting for device to settle before scanning
Vendor: Generic Model: STORAGE DEVICE Rev: 2254
Type: Direct-Access ANSI SCSI revision: 00
SCSI device sdb: 256000 512-byte hdwr sectors (131 MB)
sdb: Write Protect is off
sdb: Mode Sense: 02 00 00 00
sdb: assuming drive cache: write through
SCSI device sdb: 256000 512-byte hdwr sectors (131 MB)
sdb: Write Protect is off
sdb: Mode Sense: 02 00 00 00
sdb: assuming drive cache: write through
sdb: unknown partition table
sd 58:0:0:0: Attached scsi removable disk sdb
sd 58:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
SELinux: initialized (dev sdb, type vfat), uses genfs_contexts
usb 4-6: USB disconnect, address 58
usb 4-6: new high speed USB device using ehci_hcd and address 59
usb 4-6: configuration #1 chosen from 1 choice
scsi59 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 59
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 59
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<4>printk: 2 messages suppressed.
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 59:0:0:0: Attached scsi removable disk sdb
sd 59:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 60
usb 4-6: configuration #1 chosen from 1 choice
scsi60 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 60
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 60
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 60:0:0:0: Attached scsi removable disk sdb
sd 60:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
ohci_hcd 0000:00:03.2: wakeup
ohci_hcd 0000:00:03.2: wakeup
usb 3-2: new full speed USB device using ohci_hcd and address 2
usb 3-2: device descriptor read/64, error -110
usb 3-2: device descriptor read/64, error -110
usb 3-2: new full speed USB device using ohci_hcd and address 3
usb 3-2: device descriptor read/64, error -110
usb 3-2: device descriptor read/64, error -110
usb 3-2: new full speed USB device using ohci_hcd and address 4
usb 3-2: device not accepting address 4, error -110
usb 3-2: new full speed USB device using ohci_hcd and address 5
usb 3-2: device not accepting address 5, error -110
ohci_hcd 0000:00:03.1: wakeup
usb 2-2: new full speed USB device using ohci_hcd and address 2
usb 2-2: device descriptor read/64, error -110
usb 2-2: device descriptor read/64, error -110
usb 2-2: new full speed USB device using ohci_hcd and address 3
usb 2-2: device descriptor read/64, error -110
usb 2-2: device descriptor read/64, error -110
usb 2-2: new full speed USB device using ohci_hcd and address 4
usb 2-2: device not accepting address 4, error -110
usb 2-2: new full speed USB device using ohci_hcd and address 5
usb 2-2: device not accepting address 5, error -110
usb 4-6: new high speed USB device using ehci_hcd and address 64
usb 4-6: configuration #1 chosen from 1 choice
scsi61 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 64
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 64
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 61:0:0:0: Attached scsi removable disk sdb
sd 61:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 65
usb 4-6: configuration #1 chosen from 1 choice
scsi62 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 65
usb-storage: waiting for device to settle before scanning
Vendor: Apple Model: iPod Rev: 1.62
Type: Direct-Access ANSI SCSI revision: 00
usb 4-6: USB disconnect, address 65
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb : READ CAPACITY failed.
sdb : status=0, message=00, host=1, driver=00
sdb : sense not available.
sdb: Write Protect is off
sdb: Mode Sense: 00 00 00 00
sdb: assuming drive cache: write through
sdb:<3>Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
Dev sdb: unable to read RDB block 0
Buffer I/O error on device sdb, logical block 0
Buffer I/O error on device sdb, logical block 0
unknown partition table
sd 62:0:0:0: Attached scsi removable disk sdb
sd 62:0:0:0: Attached scsi generic sg1 type 0
usb-storage: device scan complete
usb 4-6: new high speed USB device using ehci_hcd and address 66
usb 4-6: configuration #1 chosen from 1 choice
scsi63 : SCSI emulation for USB Mass Storage devices
usb-storage: device found at 66
usb-storage: waiting for device to settle before scanning
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 189 bytes
Desc: This is a digitally signed message part
URL: <http://lists.centos.org/pipermail/centos/attachments/20071017/e226b19a/attachment.sig>
- Previous message: [CentOS] NIS problems
- Next message: [CentOS] Re: Offtopic: help with an iPod
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the CentOS mailing list