[CentOS] Lan Kernel Problem

Tue Oct 23 22:22:36 UTC 2007
Linux Man <linuxman.uru at gmail.com>

Well, with lspci, the two NIC's are Realtek Semiconductor Co., Ltd.
RTL-28139/8139C/8139C+ (rev 10) and ADMtek NC100 Network Everywhere
Fast Ethernet 10/100 (rev 11), how can I know the kernel modules
asociated?
Thanks!


2007/10/23, Alain Spineux <aspineux at gmail.com>:
> Look in your fedora fc1 or knoppix witch module was loaded for your two nic.
> Then try a
> # modprobe <your_module_name_here>
> then
> # dmesg
> to look if both nics where recognized.
> If so you have to update your modprobe.conf
>
> Alain
>
> Regards
>
>
>
> On 10/22/07, Linux Man <linuxman.uru at gmail.com> wrote:
> > I'm building a Linux box to act as Proxy/Router/Firewall.
> > I'm using CentOS 4.5, with an "old" motherboard (Asus A8V-X), and two
> > Ethernet NIC, based on a realtek chip, that's widely supported under
> > 2.4 and later kernel (the cards were functioning excellent in another
> > PC whit Fedora Core 1).
> > CentOS detects the on board LAN, but not the other two, in fact,
> > knoppix 5.0.1 doesn't detect too (kernel 2.6.17), but, Knoppix 5.1.1
> > (kernel 2.6.19) detects all three cards.
> > Do you have any idea why this behavior?
> > Centos 5.0 detects all three too, but I don't now why, my firewall
> > script (ipv4) doesn't work with this release.
> >
> > Now, thank you very much!
> > Best Regards.
> > _______________________________________________
> > CentOS mailing list
> > CentOS at centos.org
> > http://lists.centos.org/mailman/listinfo/centos
> >
>
>
> --
> Alain Spineux
> aspineux gmail com
> May the sources be with you
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>