>I'm try to bond a few interfaces together with the hopes of getting >increased throughput, and I'm using a cisco Catalyst 2900 as the switch. >I've tried using mode 0, 5, and 6 with nothing special on the switch, >and mode 4 with some ports "trunked" together (I have a feeling that the >"trunking" that the 2900 does is not 802.3ad, as it disabled the ports >it saw as redundant), yet xfer speeds always cap out at about 10MB/s. > >Has any body accomplished bonding with increased throughput as the goal, >with or without (without might be preferable) doing something special on the switch (preferably the >afore-mentioned Catalyst 2900, as that is what I have to work with as a >non-sactioned side-project ;)? > > >--Tim I just did this with an HP switch, it was obviously easier:) Have a look here: http://www.mjmwired.net/kernel/Documentation/networking/bonding.txt Some good info. HTH, jlc