[CentOS] centos on intel D945GCLF board
Janez Košmrlj
janezkosmr at volja.net
Tue Aug 19 14:11:32 UTC 2008
I tried kernel-2.6.18-92.1.10.el5.x86_64.
I know of the driver on the Intel page, but I would like a system that
works out of the box. So I can update it any time, since this system
will be a router and it will be connected to the internet 24/7.
<http://mirror.centos.org/centos/5.2/updates/x86_64/RPMS/kernel-2.6.18-92.1.10.el5.x86_64.rpm>
ABBAS KHAN wrote:
> Here is the driver, provided for Intel for the board.
> http://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=2916&DwnldID=16242&lang=eng
> <http://downloadcenter.intel.com/Detail_Desc.aspx?ProductID=2916&DwnldID=16242&lang=eng>
>
> You can compile it and give it a try as a last resort, if everything
> else fails.
> Could you please tell the version of kernal you're using?
> A simple search showed that this LAN card has a lot of issues with kernal.
>
> Thanks.
>
>
>
>
>
> On Tue, Aug 19, 2008 at 6:38 AM, Janez Košmrlj <janezkosmr at volja.net
> <mailto:janezkosmr at volja.net>> wrote:
>
> I know that disabling the LAN in BIOS works. The problem is that I
> need the on-board card, since I am trying to build a home router
> and I need 2 LAN cards for that. And the board has only one PCI slot.
>
> ABBAS KHAN wrote:
>
> I've Intel DG31PR with almost same Realtek chipset. Disabling
> / enabling on board LAN from the BIOS works flawlessly.
> You can make sure if the board is certified at
> hardware.redhat.com <http://hardware.redhat.com>
> <http://hardware.redhat.com>.
>
> I guess to test kernal you can use CentOS Live CD and the
> dmesg tool as well.
>
> Good luck!
>
>
>
> On Tue, Aug 19, 2008 at 6:22 AM, Janez Košmrlj
> <janezkosmr at volja.net <mailto:janezkosmr at volja.net>
> <mailto:janezkosmr at volja.net <mailto:janezkosmr at volja.net>>>
> wrote:
>
> Hi,
> I am trying to install centos on the intel D945GCLF board.
> It's a
> mini-ITX board with the atom processor and it uses the Realtek
> RTL8102EL LAN chipset. When I disable the on-board LAN card it
> installs and runs OK, but when I enable it, I get kernel
> panic at
> boot.
> The board runs perfectlj with Fedora 9 (with the latest
> kernel) or
> with Ubuntu server.
>
> My question is: is there some way to run centos on this board
> (test kernel, i can try for example)?
>
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org <mailto:CentOS at centos.org>
> <mailto:CentOS at centos.org <mailto:CentOS at centos.org>>
>
> http://lists.centos.org/mailman/listinfo/centos
>
>
> ------------------------------------------------------------------------
>
>
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org <mailto:CentOS at centos.org>
> http://lists.centos.org/mailman/listinfo/centos
>
>
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org <mailto:CentOS at centos.org>
> http://lists.centos.org/mailman/listinfo/centos
>
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>
More information about the CentOS
mailing list