[CentOS] S.M.A.R.T

Sat Aug 30 14:48:12 UTC 2008
Mag Gam <magawake at gmail.com>

Thankyou again.

I suppose I can take a look at smartd to get log files and have them
forward to syslog-ng, unless smartd has an email feature :-)

What does your smartd config look like for HP P400/800 controller? I
would be curious to look at that.

TIA



On Sat, Aug 30, 2008 at 10:15 AM, Mogens Kjaer <mk at crc.dk> wrote:
> Mag Gam wrote:
>>
>> Thankyou Anne.
>>
>> I just installed this and its seems to work. I am behind a RAID
>> controller so hopefully anyone with cciss drivers can shed some light.
>> I am able to see my logical devices but I have 6 drives per logical
>> device. I would like to see all 12 drive status if possible.
>
> The RAID controller watches the SMART status of the drives for you.
>
> You should watch the status of the RAID controller. It should give
> a warning if a drive is about to fail or has failed.
>
> I use array-info to get the status:
> http://sourceforge.net/projects/array-info/
>
> # /usr/local/bin/array-info -d /dev/cciss/c0d0
> Compaq Smart Array 5312
>        Firmware revision : 2.58
>        Rom revision      : 2.58
>        1  logical drive configured.
>
>        Logical drive  0 :
>          Fault tolerance : RAID 5
>          Size            : 957.10 GiB (2007181360 blocks of 512 bytes)
>          Status          : Logical drive is ok
>
> Mogens
>
> --
> Mogens Kjaer, Carlsberg A/S, Computer Department
> Gamle Carlsberg Vej 10, DK-2500 Valby, Denmark
> Phone: +45 33 27 53 25, Fax: +45 33 27 47 08
> Email: mk at crc.dk Homepage: http://www.crc.dk
> _______________________________________________
> CentOS mailing list
> CentOS at centos.org
> http://lists.centos.org/mailman/listinfo/centos
>