Thats what I wanted to know and thats exactly what I saw people complaining about this card's incompatibility with kernel. If you have time to work on the issue, if you want to find out the bottom causes and if compiling the new driver doesn't help; you can boot to Fedora and get the Kernel version and the driver's module number and then switch back to CentOS, try to load the same module (i hope it would be also in CentOS under /lib/modules/) through modprobe and then the same kernel environment, if possible - since you already told that Fedora's drivers work fine for you! I hope this helps! On Tue, Aug 19, 2008 at 7:49 AM, Janez Košmrlj <janezkosmr at volja.net> wrote: > Here is the lspci output from the machine: > > root at buhtl:~# lspci > 00:00.0 Host bridge: Intel Corporation 82945G/GZ/P/PL Memory Controller Hub > (rev 02) > 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated > Graphics Controller (rev 02) > 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High > Definition Audio Controller (rev 01) > 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port > 1 (rev 01) > 00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port > 3 (rev 01) > 00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port > 4 (rev 01) > 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > Controller #1 (rev 01) > 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > Controller #2 (rev 01) > 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > Controller #3 (rev 01) > 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI > Controller #4 (rev 01) > 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI > Controller (rev 01) > 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1) > 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC > Interface Bridge (rev 01) > 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE > Controller (rev 01) > 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA > IDE Controller (rev 01) > 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev > 01) > 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E PCI > Express Fast Ethernet controller (rev ff) > 04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. > RTL-8139/8139C/8139C+ (rev 10) > > the RTL-8139 is the secondary card pluged in the pci slot ad this one works > ok. > > And yes this is the module. > > And to Michael. I know of the disabling on-board LAN workaround, but i need > two LAN cards. > > > ABBAS KHAN wrote: > >> Is this the kernel module used for the LAN card driver? >> >> /*r8169 >> >> */ >> > > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://lists.centos.org/pipermail/centos/attachments/20080819/7523a4fa/attachment-0005.html>