kcc <peterkcc2001 at gmail.com> wrote: >> When printer is started on the network, it gets the ip from the dhcp server and registers that ip in the dns << You don't need ddns, so much as a fixed address in the DHCP server configuration. Get your printer's Ethernet address, and add a host entry in your /etc/dhcpd.conf file like this one: host kyocera1 { hardware ethernet 00:c0:ee:62:7D:bb; fixed-address 192.168.168.246; } Then you can set up an A record for the printer in your DNS the usual way. Best, --- Les Bell [http://www.lesbell.com.au] Tel: +61 2 9451 1144 FreeWorldDialup: 800909