Mogens, Correct thats what I am using. N=0 is the controller N=1 1 drive N=2 2 Drive N>3 is not working for me. Strange I have 2 logical drives. /dev/cciss/c0d1 and /dev/cciss/c0d2 Each logical drive has 6 physical volumes totaling 12 physical volumes Are you experiencing the same thing? On Sat, Aug 30, 2008 at 11:27 AM, Mogens Kjaer <mk at crc.dk> wrote: > Mag Gam wrote: >> >> Thankyou again. >> >> I suppose I can take a look at smartd to get log files and have them >> forward to syslog-ng, unless smartd has an email feature :-) >> >> What does your smartd config look like for HP P400/800 controller? I >> would be curious to look at that. >> > > I don't run smartd on the drives. > > I can get the SMART status like: > > smartctl -d cciss,N -a /dev/cciss/c0d0 > > where N is the drive number (from 0), but it will > only return the status of 6 of the 8 drives. > > Mogens > > -- > Mogens Kjaer, Carlsberg A/S, Computer Department > Gamle Carlsberg Vej 10, DK-2500 Valby, Denmark > Phone: +45 33 27 53 25, Fax: +45 33 27 47 08 > Email: mk at crc.dk Homepage: http://www.crc.dk > _______________________________________________ > CentOS mailing list > CentOS at centos.org > http://lists.centos.org/mailman/listinfo/centos >