David Hrbáč napsal(a): > Just for the record: > 1. dhcp on bonding adapter with 802.3ad is not going to work, use static one > 2. modes 5,6 work both static and dhpc > 3. mode 5 works pretty well across multiple switch units > 4. mode 6 does not > 5. 802.3ad reacts the most slowly, you have to set lacp_rate=fast and > set switch LACP timeout to the lowest one. > 6. mode 5 setting primary=eth0 - once eth0 is up, traffic goes to eth0 > back, without primary remains on the last adapter to run > 7. and do not forget to use ETHTOOLS_OPT="speed 1000" on physical adapters > 8. test done against DLINK DGS-3110-24 (modes 5,6,802.3ad) and one > unmanaged switch (modes 5,6) > Regards, > David Hrbáč Ad 1. http://www.intel.com/support/network/sb/cs-014450.htm DH