Kai Schaetzl wrote: > I threw that configuration you posted on a working vsftpd (working without > SSL) on CentOS 5 and can only confirm that it doesn't work. One obvious > problem is port 990 as ftps wants to connect via port 990. In Filezilla > you can choose to use FTPES which seems to connect to port 21 and force an > SSL auth. This actually works as you get the certificate displayed to > accept it and you can login. However, the directory listing fails. I tried > changing to active, disallowing certain protocols etc. It all fails at the > same stage. > The link posted (http://bugs.proftpd.org/show_bug.cgi?id=3094) seems to > apply exactly to this situation. So, you simply will not be able to work > with a newer Filezilla client against a vsftpd server without this patch. > > Status: Connecting to 192.168.1.232:21... > Status: Connection established, waiting for welcome message... > Response: 220 FTP > Command: AUTH TLS > Response: 234 Proceed with negotiation. > Status: Initializing TLS... > Status: Verifying certificate... > Command: USER kai > Status: TLS/SSL connection established. > Response: 331 Please specify the password. > Command: PASS ******** > Response: 230 Login successful. > Command: SYST > Response: 215 UNIX Type: L8 > Command: FEAT > Response: 211-Features: > Response: AUTH SSL > Response: AUTH TLS > Response: EPRT > Response: EPSV > Response: MDTM > Response: PASV > Response: PBSZ > Response: PROT > Response: REST STREAM > Response: SIZE > Response: TVFS > Response: 211 End > Command: PBSZ 0 > Response: 200 PBSZ set to 0. > Command: PROT P > Response: 200 PROT now Private. > Status: Connected > Status: Retrieving directory listing... > Command: PWD > Response: 257 "/" > Command: TYPE I > Response: 200 Switching to Binary mode. > Command: PASV > Response: 227 Entering Passive Mode (192,168,1,232,75,253) > Command: LIST > Response: 150 Here comes the directory listing. > Status: Server did not properly shut down TLS connection > Error: Transfer connection interrupted: ECONNABORTED - Connection aborted > Response: 226 Directory send OK. > Error: Failed to retrieve directory listing > > Kai > Hi Kai, Thanks for your input. I had problem with SmartFTP too which was supposed to work with this setup. Then, i don't know if i should report a bug... It's just too bad i can't make this work... Ragards, Guy Boisvert, ing. IngTegration inc.