Dan Carl wrote: > > > > Dan Carl wrote: >> I forgot to add the file system is riserfs. >> >> -----Original Message----- >> From: centos-bounces at centos.org [mailto:centos-bounces at centos.org]On >> Behalf Of Dan Carl >> Sent: Friday, January 04, 2008 5:43 PM >> To: centos at centos.org >> Subject: [CentOS] Migrating software raid from SUSE 9.0 to Centos 5 >> >> >> I have a SUSE 9.0 box with a software raid. >> It consists of 6 IDE drives and three different controllers >> The OS is on a separate drive. >> What I want to do is put a new boot drive in load Centos on it. >> Then I want to be able to mount the raid without loosing any of the data > on >> it. >> What information do I need from the SUSE OS (raid info etc...) to tell >> Centos how to recognize it? >> The data is backup on DVD's but it would be a real pain to reload it.(its >> around a terabyte of data) >> So I'm writing here for some advice. >> I've setup many raids in the past but only fresh installs. >> Thanks > > After you do your base Centos install and 'yum update', do: > yum --enablerepo=centosplus update kernel > yum --enablerepo=centosplus install reiserfs-utils > > Then reboot, and you should be able to mount the raid and add it to > /etc/fstab. > > Ok but how does Centos recognise the ARRAY? > Is the Array's configuration stored some where? > SUSE uses raidtab. > The only raid type conf file on my other Centos boxes is /etc/mdadm.conf If the partition type is FD, the kernel will autodetect and assemble it at boot time. > So you mean to tell me I just have to make sure reiserfs is installed, then > just mount like this in fstab > /dev/md0 /home/tera reiserfs defaults 1 > 2 > #mount -a > and bang everything in done? > Something tells me it can't be that easy. Before putting it in /etc/fstab, do a 'cat /proc/mdstat' to be sure that md0 really exists and includes the right underlying devices, but yes, it should be that simple. -- Les Mikesell lesmikesell at gmail.com