nate wrote: > Daniel Bird wrote: > > >> Using the QLoigic SAN Surfer software all the LUN's/devices are visible >> to the host. >> > > Do you see the devices in /proc/scsi/scsi ? > Actually, no. Below is the output from /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 08 Lun: 00 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 5/i Rev: 1.03 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: ATL Model: P1000 6220050 Rev: 0230 Type: Medium Changer ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 01 Vendor: QUANTUM Model: DLT7000 Rev: 2769 Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 02 Vendor: QUANTUM Model: DLT7000 Rev: 2769 Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 00 Lun: 03 Vendor: QUANTUM Model: DLT7000 Rev: 2769 Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 01 Lun: 00 Vendor: QUANTUM Model: DLT7000 Rev: 2769 Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 01 Lun: 01 Vendor: QUANTUM Model: DLT7000 Rev: 2769 Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 01 Lun: 02 Vendor: QUANTUM Model: DLT7000 Rev: 2769 Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 02 Lun: 00 Vendor: M4 DATA Model: MagFile Rev: 6.0 Type: Medium Changer ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 02 Lun: 01 Vendor: QUANTUM Model: SDLT600 Rev: 1A1A Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 02 Lun: 02 Vendor: QUANTUM Model: SDLT600 Rev: 1A1A Type: Sequential-Access ANSI SCSI revision: 02 Host: scsi1 Channel: 00 Id: 02 Lun: 03 Vendor: ATTO Model: 1290 Services Rev: 1.46 Type: Enclosure ANSI SCSI revision: 02 <sniped> Lots of RAID 5 Devices from disk array Dan