Toby Bluhm wrote: > Toby Bluhm wrote: > > Ross S. W. Walker wrote: > >> Eduardo Grosclaude wrote: > >>> Hello, My "hardware" (?) RAID system seems to work but says > > > Never mind, mdadm don't apply with HW raid. Ah, but it would if a hardware RAID1 mirror were broken, a new disk stuck in, then later the old disk was inserted into the enclosure and it was presented as a regular disk... Though he would need to determine if that is actually the case, verify it is actually not part of any existing RAID set, then remove it's LVM metadata. If it is just a "fake" RAID not abstracting the physical disks properly then he just needs to filter them out in lvm.conf. Key is to make sure it isn't the "fake" RAID scenario or it will have disastrous consequences. -Ross ______________________________________________________________________ This e-mail, and any attachments thereto, is intended only for use by the addressee(s) named herein and may contain legally privileged and/or confidential information. If you are not the intended recipient of this e-mail, you are hereby notified that any dissemination, distribution or copying of this e-mail, and any attachments thereto, is strictly prohibited. If you have received this e-mail in error, please immediately notify the sender and permanently delete the original and any copy or printout thereof.