Jerry Geis wrote: > Running e2label /dev/sda1 reports that in fact the partition is "/" > > My kernel boot line is infact "root=LABEL=/" > > My issue here is that I did the initial install. This install boots with > the LABEL=/ just fine. > After the custom kernel build it does not boot. I'm trying to find out > if there is an option in the config > that is needed for these label boots. Perhaps one of these: (I dont know > if I am fishing here and/or which one would do it) > > CONFIG_NETLABEL > CONFIG_BSD_DISKLABEL > CONFIG_UNIXWARE_DISKLABEL How about Diff the config's from the stock kernel and yours ? Although, if the kernel speaks ext3 it should be fine for labels, as far as I can tell off the top of my head. > I did search and wasn't finding what I was looking for, then I posted. > > I have not changed the line to try root=/dev/sda1 as I was trying to > make it work the same way. That might be worth trying, its a simple hack and it will tell you if your kernel even boots or not. -- Karanbir Singh : http://www.karan.org/ : 2522219 at icq