on 6-21-2008 9:04 PM Joshua Baker-LePain spake the following: > I've been having no end of issues with a 3ware 9650SE-24M8 in a server > that's coming on a year old. I've got 24 WDC WD5001ABYS drives (500GB) > hooked to it, running as a single RAID6 w/ a hot spare. These issues > boil down to the card periodically throwing errors like the following: > > sd 1:0:0:0: WARNING: (0x06:0x002C): Command (0x8a) timed out, resetting > card. > > Usually when this happens, it's followed by: > > 3w-9xxx: scsi1: AEN: INFO (0x04:0x005E): Cache synchronization > completed:unit=0. > > On the less pleasant occasions, it's followed by: > > scsi1: ERROR: (0x06:0x0036): Response queue (large) empty failed during > reset sequence. > 3w-9xxx: scsi1: ERROR: (0x06:0x002B): Controller reset failed during > scsi host reset. > sd 1:0:0:0: scsi: Device offlined - not ready after error recovery > > This of course leads to a several hour downtime as the system has to be > powered down (not just rebooted) and then the volume needs to be fscked. > I've been back and forth with both the vendor and (via the vendor) 3ware > with this. The card has been replaced, as well as the whole system. > I'm running the latest firmware and drivers from 3ware. > > Have other folks had good luck with this card? What sorts of configs > are you running? I'm in the position of needing more storage, and I'm a > bit gun shy on 3ware at the moment... > That looks like either drive, cabling, or power problems. -- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!! -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 258 bytes Desc: OpenPGP digital signature URL: <http://lists.centos.org/pipermail/centos/attachments/20080622/a2396fd3/attachment-0005.sig>