[CentOS] PE2950, RAID 0, failed disk
John R Pierce
pierce at hogranch.comSun Mar 9 03:43:21 UTC 2008
- Previous message: [CentOS] PE2950, RAID 0, failed disk
- Next message: [CentOS] PE2950, RAID 0, failed disk
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
Scott R. Ehrlich wrote: > I have a Dell PowerEdge 2950 with PERC 5/i, and 6 disks. Two disks > have one logical volume via a hardware RAID 1 and consist of CentOS 5 > 64-bit; the remaining four comprise a logical volume via a hardware > RAID 0, and is all user data. > > One drive on the RAID 0 went bad. I removed it while the system was > on, tried a reboot, and the system hangs at RedHat Linux... Starting every 4th block of your data is gone. RAID-0 isn't actually RAID, as there's no Redundancy. Instead, its AID-0.
- Previous message: [CentOS] PE2950, RAID 0, failed disk
- Next message: [CentOS] PE2950, RAID 0, failed disk
- Messages sorted by: [ date ] [ thread ] [ subject ] [ author ]
More information about the CentOS mailing list