Aka you had a hardware problem and it tried to save the filesystem from corruption. -----Original Message----- From: centos-bounces at centos.org [mailto:centos-bounces at centos.org] On Behalf Of Alain Spineux Sent: Monday, March 31, 2008 4:44 PM To: CentOS mailing list Subject: [CentOS] Re: my centos switched alone its root fs to read-only I went to the basement to check the "console" : I got this EXT3-fs error (device md1): htree_dirblock_to_tree: bad entry in directory #2483 009: rec_len % 4 != 0 - offset=0, inode=211961333, rec_len=5205, name_len=231 Abordinf journal on device /dev/md1 journal commit IO error ext3_abot called. EXT3-fs error (device md1): ext3_journal_start_sb: Detected aborted journal Remounting file read-only Grrrrrr On Mon, Mar 31, 2008 at 10:39 PM, Alain Spineux <aspineux at gmail.com> wrote: > My test server was in very eavy load, running kolab's components: > postfix, cyrus-imap and openldap > A second test machine was sending, and reading emails as fast as it can. > The CPU was never idle ! > I left the server at about 17H30 > and at 22H I find it "uncommitted" (difficult to work when the > partition in read-only !) > However the mount command report it as RW ! > The /boot is still RW for real indeed. > > some more info > > [root at c700 trunk]# touch /foo.bar > touch: cannot touch `/foo.bar': Read-only file system > [root at c700 trunk]# mount > /dev/md1 on / type ext3 (rw) > proc on /proc type proc (rw) > sysfs on /sys type sysfs (rw) > devpts on /dev/pts type devpts (rw,gid=5,mode=620) > /dev/md0 on /boot type ext3 (rw) > tmpfs on /dev/shm type tmpfs (rw) > none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) > sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw) > max:/s0 on /s0 type nfs (rw,addr=192.168.*.*) > [root at c700 trunk]# cat /var/log/messages > Mar 30 04:02:13 c700 syslogd 1.4.1: restart. > Mar 30 05:47:29 c700 restorecond: Will not restore a file with more > than one hard link (/etc/resolv.conf) Invalid argument > Mar 31 07:41:37 c700 restorecond: Will not restore a file with more > than one hard link (/etc/resolv.conf) Invalid argument > [root at c700 trunk]# date > Mon Mar 31 22:14:02 CEST 2008 > [root at c700 log]# df > Filesystem 1K-blocks Used Available Use% Mounted on > /dev/md1 18316104 3921164 13449520 23% / > /dev/md0 101018 11076 84726 12% /boot > tmpfs 257756 0 257756 0% /dev/shm > max:/s0 425343328 389031904 14705248 97% /s0 > > Any idea ? > > The system is still up and running until I need to carry on my test further. > > Regards. > > -- > Alain Spineux > aspineux gmail com > May the sources be with you > -- Alain Spineux aspineux gmail com May the sources be with you _______________________________________________ CentOS mailing list CentOS at centos.org http://lists.centos.org/mailman/listinfo/centos