Not sure if this is off topic but I installed freeradius with yum on centos
5 and I'm hoping someone has some advice on getting DNIS proxy working
In the acct_users file I have
DEFAULT Called-Station-Id == "5500", Proxy-To-Realm := "xxx"
Fall-Through = yes
In the proxy file I have
realm xxx {
type = radius
authhost = xxxx:1645
accthost = xxxx:1646
secret = something
}
But when I test it never seems to trigger the DNIS proxy setup. This is what
I get below, also named realms are working.
rad_recv: Access-Request packet from host 209.213.66.12:1650, id=114,
length=94
User-Name = "ectest"
User-Password = "test123"
NAS-IP-Address = 127.0.0.1
NAS-Port = 1
Called-Station-Id = "5500"
Proxy-State =
0x471e493f7f0000010495000000000000000000000000000000000000
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "ectest", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 0
modcall[authorize]: module "files" returns notfound for request 0
modcall: leaving group authorize (returns ok) for request 0
auth: No authenticate method (Auth-Type) configuration found for the
request: Rejecting the user
auth: Failed to validate the user.
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---