on 10-5-2008 2:58 PM Iulian Badea spake the following: > Hello all, > > I have 2 x 250GB sata disks (sda and sdb). > > # fdisk -l /dev/sda > > Disk /dev/sda: 250.0 GB, 250059350016 bytes > 255 heads, 63 sectors/track, 30401 cylinders > Units = cylinders of 16065 * 512 = 8225280 bytes > > Device Boot Start End Blocks Id System > /dev/sda1 * 1 14939 119997486 fd Linux raid > autodetect > /dev/sda2 14940 29878 119997517+ fd Linux raid > autodetect > /dev/sda3 29879 30400 4192965 fd Linux raid > autodetect > > # fdisk -l /dev/sdb > > Disk /dev/sdb: 250.0 GB, 250059350016 bytes > 255 heads, 63 sectors/track, 30401 cylinders > Units = cylinders of 16065 * 512 = 8225280 bytes > > Device Boot Start End Blocks Id System > /dev/sdb1 * 1 522 4192933+ fd Linux raid > autodetect > > # cat /proc/mdstat > Personalities : [raid1] > md2 : active raid1 sdb1[1] sda3[0] > 4192832 blocks [2/2] [UU] > > md1 : active raid1 sda2[1] sda1[0] > 119997376 blocks [2/2] [UU] > > What I want to do: > - have on each disk 2 partitions (4gb for swap and the 200gb+ the rest for > /) > - raid 1 between them > > This is what I wanted in the beginning, but...I didn't paid attention... > > What can I do to rebuild it to my needs (without loosing data or > reformatting)? > > Thanks It looks like you can fail sdb1 from md2 and start fresh with it. You can build 2 new arrays on the single drive using the -missing parameter. That will let you create the raid1 with only one partition. You can then copy all the data from md1 and md2 to what will become md3 and md4. Then you can wipe sda and copy the partition table from sdb to sda and add the partitions to md3 and md4. If the out of sequence numbering of md3 and md4 bothers you, you can renumber them from a rescue CD. -- MailScanner is like deodorant... You hope everybody uses it, and you notice quickly if they don't!!!! -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 250 bytes Desc: OpenPGP digital signature URL: <http://lists.centos.org/pipermail/centos/attachments/20081007/aa1813d6/attachment-0005.sig>