Am 26.10.2008 um 14:47 schrieb Fabian Arrotin: > fajarpri at cbn.net.id wrote: >> Hi all, >> Sorry for the OT. >> Does anyone can share to how to reset an IBM Bladecenter Advance >> Management Module web access? >> Recently, I've got an IBM Bladecenter chassis E 8677. There's no >> one in >> the office who knows about the IP nor the password for it. >> Thank you, > > As already answered by someone else, the default IP is > 192.168.70.125/24 and the default user/password is USER/PASSW0RD > (with a zero and not o) > If that doesn't work, you can still reset the whole MM config : http://www.redbooks.ibm.com/abstracts/tips0519.html?Open > But i assume you already searched for that, right ? The default IP is useless to him, unless he has a laptop or some other system connected to it cross-over or at least on the same switch. He's at home right now, I guess, so he should look for someone who does know the real IP of that MM. Because to reset it to factory-default, you've got to have physical access (at which point he could just removed it from the BC and plug it in again...). Rainer